Derbyshire · England

Non-slip bath & shower coating in Winster, Derbyshire

We travel to Winster for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Winster homes

How we handle non-slip bath coating in Winster

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you are dealing with a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, we can typically put it right, whatever the material.

The work is covered for a year after we finish. Just call us if there is a problem and we will sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Location
Winster (DE4)
Region
Derbyshire
Warranty
One year on every repair
Price
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Repairing versus replacing in Winster

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.

Why choose Surface Doctor in Winster

  • We will tell you if it’s not worth repairing
  • One-year guarantee on every repair
  • Fixed prices from your photos
  • Everything repaired in place

See our prices page.

When we’d advise against a repair

Not everything can be repaired, and we will tell you before we start. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before booking.

Materials we work on in Winster

  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Shower trays

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

For landlords and businesses

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

How we price non-slip bath coating

We give every job a fixed price from photos. This is what makes a difference:

  • The type of damage
  • The size and number of damaged areas
  • How many items we do on one visit
  • The material

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Send photos for a quote

You can take the photos on your phone, there’s no need for anything special. Ensure they show:

  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus
  • One picture of the entire bath or shower tray

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

When to call us in Winster

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Common reasons people in Winster contact us include:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Before booking anyone

  • How to look after the finish
  • How your room will be protected
  • How long the guarantee is and what it covers
  • What prep work is covered

10 questions to ask before booking

FAQs for Winster

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

What does non-slip bath coating cost?

Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders in Winster.

Do you come to Winster?

Yes. We cover the entire UK and travel to Winster and the rest of Derbyshire. Send us pictures for a fixed quote, or call 0345 017 0787.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Our work in Winster

Winster is about 10 miles north-west of Belper, in Derbyshire. Jobs in Winster are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover 532 places across Derbyshire, from the larger towns to small villages. Our nearest city page is Manchester, about 33 miles away.

Postcode districts we cover here: DE4. Streets in the area include Wensley Road, Leacroft Road and Wyntor Avenue, all of which we cover. Other places close to Winster include Upper Town (1 mile north), Birchover (1 mile north), Elton (1 mile west), Warrencarr (2 miles north-east) and Stanton Lees (2 miles north-east). Further out, we also cover Chesterfield (11 miles north-east), Belper (10 miles south-east), Buxton (14 miles north-west), Heanor (15 miles south-east), Dronfield (13 miles north-east) and Ripley (12 miles south-east).

Around Winster

Locally, our jobs take us to homes close to Winster CofE Primary School, St John the Baptist's Church and Old Bowling Green Inn. For rail, the closest station is Matlock station, about 3.3 miles east of the centre. A little further out are Willersley Castle (3.9 miles south-east) and Whitworth Hospital (2.7 miles east). For a walk, there’s Harthill Moor.

Map of Winster © OpenStreetMap contributors

What happens on the day

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours in most cases. The room is left tidy and ready to use once it has cured.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Make sure the room can be ventilated
  • Tell us if there are stairs or a lift

Getting a price

Upload photos of the damage and one of the whole item, with your DE4 postcode, and we’ll reply with a fixed quote.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.