East Sussex · England
Non-slip bath & shower coating in Winton, East Sussex
Non-slip bath coating in Winton without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How we handle non-slip bath coating in Winton
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Whether it’s resurfaced baths that are now too smooth and worn-out textured areas, we can help, on wet room floors (ask us), shower trays and acrylic baths alike.
Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Winton (BN26)
- Area hub
- East Sussex
- Guarantee
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Winton
Other services in Winton
Covering Winton
Winton is about 3 miles north-east of Seaford, in East Sussex. Clients in Winton get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in 289 places across East Sussex, from the larger towns to small villages. Our nearest city page is London, about 49 miles away.
Every address in BN26 is covered, from the main roads to the quietest streets. We also cover the places around Winton: Alfriston (1 mile south), Lullington (1 mile south), Milton Street (1 mile east), Dukes Green (1 mile south) and Alciston (1 mile north-west). Further out, we also cover Eastbourne (6 miles east), Bexhill-on-Sea (14 miles east), Seaford (3 miles south-west), Lewes (8 miles north-west), Hailsham (6 miles north-east) and Uckfield (11 miles north).
Local landmarks in Winton
In Winton, that means homes near Alfriston School, Ye Olde Smugglers Inn and Church of St. Andrew. For rail, the closest station is Berwick (Sussex) station, roughly 1.9 miles north. Other landmarks nearby include Old Forge Museum (Alfriston) (within half a mile south) and Arlington Castle (0.5 miles east). Not far away are Firle Beacon.
What non-slip bath coating costs
You will know the full cost before booking. We look at:
- Unusual colours or finishes
- Access to the area
- How many areas need work
- The material and finish
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what helps:
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Send us a picture of the damage and one of the entire item, with your BN26 postcode, and we will reply with a fixed price.
Signs you need non-slip bath coating in Winton
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Most people contact us after spotting one of these:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Comparing quotes
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- Who will actually do the work
- Whether the colour is mixed to match
When a repair is not the answer
We won’t take on work that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
What happens on the day
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a few hours. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say immediately if a repair is the right fix.
Read more
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
FAQs for Winton
What does non-slip bath coating cost?
Because every job differs, we price from pictures. You will get a fixed figure before you book.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Repair technicians who travel to you, UK-wide
- Fixed prices from your photos
- Most jobs done in one visit
- We leave the room as we found it
Read our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
