Surrey · England

Bath and surface repairs in KT12

Repairs and resurfacing across KT12, from Walton-on-Thames, Hersham and Burwood Park. Free, fixed quotes from your photos and a one-year guarantee.

Surface repairs across KT12

How bath repair works in KT12

Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for chips along the edge of the bath and deep scratches in acrylic, across roll-top & freestanding, cast iron enamel and acrylic.

Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a few hours for most jobs. We leave the room clean and you’ll know when it can be used.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, normally by the next day, the bath is ready to use.

Cost

Our bath repair starts from £95. The price reflects the work involved, not where you live. You will see the full price before booking.

Why clients in KT12 choose us

  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • One-year guarantee on every repair
  • No extra charge for your area

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.

What’s near Walton-on-Thames

In Walton-on-Thames, that means homes near Sunbury Park, Walton Oak Primary School and St John, among other places. The nearest railway station is Walton-On-Thames station, roughly 0.8 miles south. Well-known places in the area include Elmbridge Museum (2.2 miles south-east) and No. 2 New Zealand General Hospital (0.8 miles west). Not far away are Kempton Park Reservoirs and Ferris Meadow Lake.

Materials and what they mean for the repair

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Should you replace it?

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes.

What your quote should include

  • When it can be used again
  • What aftercare is recommended
  • How the room is protected while they work
  • Whether the price is fixed and includes VAT

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

How we price bath repair

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • Where the damage is and how we get to it
  • The colour and finish to match
  • The size and number of damaged areas
  • The type of damage

Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Getting a price from photos

A couple of clear pictures is all it takes. It helps if you send:

  • A wider photo showing the whole bath
  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus

For a price in KT12, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

How the damage happens

Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.

Customers normally contact us about:

  • Holes from dropped items
  • Chips under the taps
  • Rust by the waste and overflow
  • Deep scratches in acrylic

FAQs for KT12

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

How invisible is a bath repair?

We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.

Is there a call-out fee?

We do not add a call-out fee. Your fixed quote includes everything.

Is my repair covered?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Can you redo someone else’s repair?

In most cases. The old repair comes out first.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.