Carmarthenshire · Wales

Bath and surface repairs in SA34

We travel to every part of the SA34 postcode district, including Hendy-Gwyn, Tavernspite and Llwyn-y-brain. Everything is repaired in place, with a one-year guarantee.

About bath repair in SA34

We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Typical jobs include an old repair that has yellowed or come loose and rust by the waste and overflow, in pressed steel enamel, acrylic and whirlpool & spa baths.

We agree an arrival time beforehand. Once we’re there, the work takes a morning or an afternoon. We leave the room clean and you’ll know when it can be used.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can typically use the bath the day after.

Prices in SA34

Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor

  • A fixed quote before you book
  • A year’s guarantee on all work
  • Accredited with CHAS, Constructionline and SafeContractor
  • Colours mixed by hand to suit your surface

Getting a price

If you are in SA34 and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Near you in Hendy-Gwyn

Locally, our jobs take us to homes close to The Farmers Arms and St Mary's Church and the streets around them. Hendy-Gwyn has its own railway station: Whitland station. Other landmarks nearby include Castell Cynon (3 miles south-west). Green spaces nearby include Pen-cil-post.

What we are called out for in SA34

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

It’s worth getting a quote if you see:

  • Chips caused by builders
  • Chips under the taps
  • A kit repair that didn’t last
  • Chips along the edge of the bath

Looking after it afterwards

Nothing complicated is needed:

  • Check that an acrylic bath doesn’t move when you stand in it
  • A dripping tap stains enamel, so fix it early
  • Don’t leave razors or cans standing in the bath
  • Protect the bath with a towel when doing jobs nearby

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

How we price bath repair

Prices start from £95. We don’t charge extra for travel to SA34. The price comes down to:

  • The type of damage
  • Unusual colours or finishes
  • The material
  • Where the damage is and how we get to it

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your pictures

You can take the pictures on your phone. Just ensure we can see:

  • A clear, close picture of the problem area
  • A picture taken from further back
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

Repairs by material

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

FAQs for SA34

Will the repair show?

On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.

Do you cover the whole of Carmarthenshire?

Everywhere in the UK, SA34 included. Travel is included in the price.

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

What happens next?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in SA34.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Is there any odour?

It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.