Pembrokeshire · Wales
Bath chip & crack repair in Crunwere, Pembrokeshire
Our technicians come to Crunwere for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- A cracked acrylic bath
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why Crunwere clients choose us
- Work done at your home or business
- Everything repaired in place
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
Read our full price list or resurfacing vs replacement cost guide.
About our bath repair in Crunwere
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. Whether it’s holes from dropped items and chips caused by builders, we can help, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Crunwere (SA67, SA34)
- Area hub
- Pembrokeshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath repair in Crunwere
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Are there extra charges for Crunwere?
No. Our quotes include travel, with the same prices everywhere we work.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
How much does bath repair cost in Crunwere?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
How long before I can use the bath?
Normally by the following day, though it depends on what we have done.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Pembrokeshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
Honest limits
We’ll always be straight with you, so here’s what a repair won’t do:
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we will tell you honestly before you book.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Our work in Crunwere
Crunwere is about 14 miles north-east of Pembroke, in Pembrokeshire. Whether you’re in the middle of Crunwere or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Crunwere is one of 223 towns and villages in Pembrokeshire where we work.
Our technicians cover all of the SA67 and SA34 postcode area and the streets around it. Jobs here include addresses on Rectory Hill and Crunwere Close and the roads around them. Other places close to Crunwere include Llanteg (1 mile south-west), Tavernspite (1 mile north-west), Amroth (2 miles south), Ludchurch (3 miles west) and Lampeter Velfrey (3 miles north-west). Further out, we also cover Haverfordwest (15 miles west), Pembroke (14 miles south-west), Pembroke Dock (14 miles west), The Marsh (15 miles west), Dinbych-y-Pysgod (7 miles south-west) and The Green (7 miles south-west).
Landmarks near Crunwere
In Crunwere, that means homes near Tavernspite C.P. School and St Elidyr's Church. For rail, the closest station is Whitland station, roughly 3.6 miles north of the centre. Further afield, we also cover the area around Castle Ely (within half a mile east). For a walk, there is Marros Mountain.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Towns and villages near Crunwere
What else we do in Crunwere
What bath repair costs
Prices start from £95. We give every job a fixed price from pictures. This is what makes a difference:
- The colour and finish to match
- Whether we combine several jobs
- The type of damage
- Previous DIY repairs that have to come out
Our prices are the same across the UK, so there is no premium for Crunwere. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
You can take the photos on your phone. Make sure they show:
- What it’s made of, if you know
- Your postcode, so we can check dates
- Natural light rather than flash
- A coin or ruler next to the damage for scale
Upload photos of the damage and one of the whole item, and tell us you are in Crunwere, and we’ll reply with a fixed price.
Do you need bath repair in Crunwere?
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Most people get in touch after spotting something like this:
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
- A chipped rim or side
- Holes from dropped items
What to look for in a quote
- If travel is included in the price
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
About our accreditations · Every repair comes with a one-year guarantee.
