Telford and Wrekin · England

Bath and surface repairs in TF5

Bath, tray, sink and worktop repairs across TF5, covering Shawbirch, Bratton and Admaston. Fixed prices from photos and a one-year guarantee.

Need a repair in TF5?

Bath repair at your home in TF5

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. Typical jobs include a hole punched through by something heavy and damage done while the bathroom was being fitted, on acrylic, roll-top & freestanding and pressed steel enamel.

Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a morning or an afternoon from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

What it costs in TF5

Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why book with us

  • No extra charge for your area
  • Dust sheets down, tidy finish
  • Nothing taken out or refitted
  • CHAS and Constructionline accredited

Ask for a price

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

What’s near Shawbirch

Around Shawbirch, we work in homes near Charlton School, Dothill Primary School and Church of St. Catherine, among other places. The nearest railway station is Wellington (Shropshire) station, about 1.3 miles south-east. Nearby you will also find Princess Royal Hospital (1 mile south-east) and Charlton Castle (3.1 miles south-west). Green spaces nearby include The Ercall.

Honest limits

We’ll always be straight with you, so here’s what a repair will not do:

  • Wear across the whole surface, which needs re-enamelling
  • Metal that has corroded all the way through
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Repairs by material

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.

How we price bath repair

Prices start from £95. Quotes are free and the price is fixed. What we take into account:

  • How many areas need work
  • The material
  • Previous DIY repairs that have to come out
  • What kind of damage it is

We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send photos for a quote

The better the photos, the more accurate the price. Here’s what helps:

  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size
  • Natural light rather than flash

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.

Repair or replace?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price.

Questions to ask before booking

  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price
  • Aftercare advice
  • When it can be used again

Signs you need bath repair

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.

You may need us if you’ve spotted any of these:

  • Rust by the waste and overflow
  • A failed DIY repair that’s discoloured or lifting
  • Chips along the edge of the bath
  • Deep scratches in acrylic

Your questions about bath repair in TF5

Is a holed acrylic bath repairable?

Typically. Photos of the hole and the underside help us check.

Will there be a smell?

It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.

Do you cover the entire of Telford and Wrekin?

Across the UK. Prices do not change with location.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.