East Riding of Yorkshire · England
Shower tray repair & resurfacing in Arram, East Riding of Yorkshire
Shower tray repair in Arram without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- A tray that looks tired however much you clean it
- Cracks running from the waste
Aftercare tips
Aftercare is simple:
- Don’t use strong acids or bleach
- Store bottles off the tray
- Replace failing sealant promptly
- Ventilate the room after showers
Keep an eye on the sealant, and reseal when it starts to fail.
Stop using the shower if the tray is cracked. Water may be getting under the tray, and the damage below is not visible.
How we handle shower tray repair in Arram
The first thing we do is check the tray: a tray that moves needs its support sorted first, or the crack will come back. We’ll tell you if that is the case. Whether it’s a tray that looks tired however much you clean it and a tray that flexes, we can help.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Arram (HU17)
- Area hub
- East Riding of Yorkshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. It generally takes a few hours, or most of a day for a full resurface, and you can get on with other things while we are there.
- First we check the tray is solid and work out why any crack happened.
- We clean and prepare the damaged area or the entire tray.
- We fill and reinforce chips and cracks, then sand them flush.
- The repair is colour matched, or the whole tray gets a new finish.
- We leave it to cure; the shower is normally usable the day after.
Preparing for the visit
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
How to get a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
What we’re called out for in Arram
The waste is a common starting point for cracks, because that’s where the tray is weakest and the fitting puts pressure on it.
If you can see any of these, send us a photo:
- A damaged area around the waste
- Damage from a refit or building work
- Chipped corners or rims
- A dull, stained or worn surface
Comparing quotes
- Who will actually do the work
- How long it needs to cure
- What protection goes down before work starts
- What the guarantee covers, and for how long
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Prices and what affects them
Repairs from £95. We do not charge extra for travel to Arram. The price depends on:
- How easy the damage is to reach
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- A picture taken from further back
- A close-up of the damage, in focus
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
What we cannot put right
A few problems are outside what a surface repair can do:
- Trays cracked in several places
- A tray that flexes because it was never properly supported
- Leaking waste fittings
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Arram
- Ceramic
- Stone resin
- Enamelled steel
- Acrylic
- Cast iron
Places near Arram
What else we do in Arram
Our work in Arram
Arram is about 3 miles north of Beverley, in East Riding of Yorkshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Arram is one of 299 places in East Riding of Yorkshire where we work. You can also see our page for Leeds, about 46 miles away.
Every address in HU17 is within our area, from the main roads to the quietest streets. We also cover the places around Arram: Leconfield (2 miles west), Hull Bridge (2 miles south), Molescroft (2 miles south-west), Beverley (3 miles south) and Cherry Burton (3 miles west). Further out, we also cover Driffield (9 miles north), Pocklington (15 miles west), Hessle (11 miles south), Cottingham (7 miles south), Hornsea (10 miles east) and Market Weighton (10 miles west).
Near you in Arram
Arram has its own railway station: Arram station. A little further out are East Riding Community Hospital (2.2 miles south) and The Beverley Treasure House (3 miles south).
Arram: your questions answered
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you come to Arram?
Yes, we do. Repair technicians travel to Arram from across the region, and the price is the same as everywhere else.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Should you replace it?
If the tray is solid and the crack hasn’t let water spread, repair is generally best. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Arram
- We leave the room as we found it
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
Take a look at our pricing.
Landlord and trade work in Arram
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
