Shropshire · England

Shower Tray Repair in Balmer Heath

Shower tray repair for Balmer Heath, without a refit. Send us photos for a fixed quote, then book a visit.

  • Repairs from £95
  • Chips caused during fitting
  • Chips on the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Balmer Heath

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Stick to gentle cleaners
  • Keep heavy bottles on a shelf
  • Keep harsh chemicals off the tray
  • Don’t ignore a tray that flexes

Store heavy bottles on a shelf, not on the tray, so they can’t be knocked over.

Stop using the shower if the tray is cracked. Water can get through to the floor and walls, and the damage below isn’t visible.

Shower tray repair at your home in Balmer Heath

If the entire tray looks tired, we can resurface it, for a clean, uniform finish. Whether it’s a dull, stained or worn surface and chips on the edges, we can help.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Before and after: an old shower tray refinished by Surface Doctor
Location
Balmer Heath (SY12)
Region
Shropshire
Cover
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

The process

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours for a repair, longer for a full resurface. Before we leave, we explain how soon it can be used and how to look after it.

  1. We ensure the tray does not flex and look for the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. We colour-match the repair, or spray a new finish across the whole tray.
  5. We leave it to cure; the shower is normally usable the following day.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Tell us if there are stairs or a lift
  • Let us know if it has been repaired before

Getting a price

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Send pictures for a quote

Related advice

About Balmer Heath

Balmer Heath is about 8 miles south-west of Whitchurch, in Shropshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Balmer Heath is one of 433 towns and villages in Shropshire we cover. Our jobs stretch from Balmer Heath to Liverpool (35 miles away).

Our visits in SY12 work the same way as everywhere else we cover. Nearby, we also work in Breaden Heath (1 mile north), Welshampton (1 mile north-west), Rowe (1 mile north-east), Maelor South (3 miles north) and Ellesmere (3 miles west). Within a short drive, we also cover Shrewsbury (14 miles south), Oswestry (10 miles west), Market Drayton (14 miles east), Coleham (14 miles south), Kingsland (14 miles south) and Whitchurch (8 miles north-east).

Landmarks near Balmer Heath

Our customers here include homes close to Church of St John the Evangelist and Welshampton CofE Primary School, among other places. Nearby you’ll also find Ellesmere Castle (2.5 miles west) and Penley Community Hospital (4.1 miles north-west). The countryside around Balmer Heath includes Newton Mere.

Map of Balmer Heath © OpenStreetMap contributors

Materials and what they mean for the repair

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Prices and what affects them

Prices start from £95. Every quote is fixed and free. What we look at:

  • The type of damage
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs
  • How much damage there is

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Quotes from your photos

A couple of clear pictures is all it takes. Try to include:

  • Whether it’s been repaired or coated before
  • Any details about the material
  • A wider photo showing the entire shower tray
  • A clear, close picture of the problem area

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Why repair rather than replace?

If the tray is solid and the crack hasn’t let water spread, repair is typically best. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Our shower tray repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why choose Surface Doctor in Balmer Heath

  • One-year guarantee on every repair
  • Colours mixed by hand to suit your surface
  • Straight answers about what a repair can do
  • A fixed quote before booking

See our prices page.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Trays cracked in several places
  • Leaking waste fittings
  • A tray that moves underfoot

If in doubt, send photos and we’ll say what we think.

What we work on

  • Ceramic
  • Acrylic
  • Cast iron
  • Enamelled steel
  • Stone resin

FAQs for Balmer Heath

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you resurface a whole tray?

Yes. We can resurface the whole tray for a fresh finish without removing it.

Can you repair something that is been repaired before?

Generally, yes. The old repair comes out first.

How long before I can shower?

We will give you the curing time on the day, generally the following day.

What if the damage is worse than the photos show?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

What happens once I’ve sent photos?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

Do you redo the sealant?

Yes, if you’d like us to. After a repair is a good time to reseal.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your pictures and you’ll get one combined price.

Landlord and trade work in Balmer Heath

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.