Lancashire · England
Shower Tray Repair in Bamber Bridge
Shower tray repair for Bamber Bridge, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Movement when you stand on it
- Chips caused during fitting
What we can’t put right
We will not take on work that will not last, so these are the limits:
- Leaking waste fittings
- Damage below the tray that needs a builder
- A tray that flexes because it was never properly supported
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Bamber Bridge
- Acrylic
- Cast iron
- Stone resin
- Ceramic
- Enamelled steel
Shower tray repair at your home in Bamber Bridge
Every crack has a cause, and we find it first. A tray that moves needs its support sorting first, so the repair lasts. Typical jobs include chips or cracks by the plughole and a tray that looks tired however much you clean it, on acrylic, enamelled steel and stone resin.
We stand behind the work with a one-year guarantee.
- Location
- Bamber Bridge (PR5, PR6, PR1)
- County
- Lancashire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Bamber Bridge
Other services in Bamber Bridge
What we do, step by step
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. It normally takes a few hours, or most of the day to resurface the whole tray, and we’ll tell you if anything changes.
- We protect the floor and the enclosure.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We tidy up and tell you when you can shower.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
Get a quote
Email us photos of the damage and a wider shot of the whole item, and tell us you’re in Bamber Bridge, and we’ll reply with a fixed quote.
Read more
What we’re called out for in Bamber Bridge
Rigid trays don’t bend, they crack when they sit on an uneven or poorly supported floor. Movement in a timber floor has the same effect.
It’s worth getting a quote if you see:
- Chips on the edges
- Staining and dullness across the tray
- A cracked shower tray
- Chips caused during fitting
Before booking anyone
- How soon you can use it again
- A fixed price, and whether VAT is included
- What preparation is included
- What the guarantee covers, and for how long
What affects the price in Bamber Bridge
Prices start from £95. Every quote is fixed and free. What we take into account:
- The type of damage
- The size and number of damaged areas
- Doing more than one item at once
- Whether old repairs or coatings need taking off
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- Something in shot to show the size
- Any earlier repairs or coatings
- Any details about the material
- One sharp close-up of the damage
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Bamber Bridge questions
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What areas do you cover?
Across the UK, and that includes Bamber Bridge. Our prices are the same everywhere.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is it OK to use a cracked tray?
Only if you’re sure it is not leaking. Look for damp or stains below.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Why repair rather than replace?
A new shower tray normally means taking out the enclosure and tiles, relaying the base and tiling again. A repair or resurface leaves all of that alone. Prices start from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Most jobs done in one visit
- A year’s guarantee on all work
- One price list for the entire UK
- Technicians who travel to you, UK-wide
See our full price list.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Replace failing sealant promptly
- Give the tray a quick rinse after use
- Keep harsh chemicals off the tray
- Keep the bathroom well ventilated
Store heavy bottles on a shelf, not on the tray, so they cannot be knocked over.
If the tray creaks or moves, get it checked, before it cracks.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Our work in Bamber Bridge
Bamber Bridge is about 14 miles north-west of Bolton, in Lancashire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We cover all 482 towns and villages across Lancashire, from the larger towns to small villages. Our jobs stretch from Bamber Bridge to Manchester (about 25 miles away).
We work across the PR5, PR6 and PR1 postcode area and the streets around it. From Station Road, Church Road and Lostock Square or anywhere nearby, a technician can come to you. You’ll find Bamber Bridge on the A6 and A49, which makes it straightforward to reach. We also travel to Lostock Hall (1 mile west), Walton-le-Dale (1 mile north), Higher Walton (1 mile north-east), Cuerden (1 mile south) and Clayton Brook (2 miles south-east). Further out, we also cover Preston (3 miles north-west), Chorley (6 miles south), Lytham St Anne's (14 miles west), Accrington (12 miles east), Leyland (3 miles south-west) and Fulwood (5 miles north-west). Bamber Bridge is one of the larger places we cover in Lancashire.
Around Bamber Bridge
Around Bamber Bridge, we work in homes near The Pump & Truncheon pub, St Mary's and St Benedict's Roman Catholic Primary School and Church of the Blessed Virgin Mary, among other places. There is a railway station in Bamber Bridge itself: Bamber Bridge station. Well-known places in the area include Fishergate Shopping Centre (2.6 miles north-west) and Preston Royal Infirmary (2.8 miles north-west). Not far away are Brockholes.
About our accreditations · Every repair comes with a one-year guarantee.
