Wiltshire · England

Shower Tray Repair for Bapton homes

Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Bapton and across Wiltshire. Send photos for a free, fixed quote.

  • Repairs from £95
  • Movement when you stand on it
  • Chipped corners or rims
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Bapton

Shower tray repair in Bapton without replacing anything

Most tray damage can be repaired in place, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. We regularly repair stone resin, cast iron and acrylic, and common reasons people get in touch are scratches from cleaning or grit and a crack across the base.

You get a one-year guarantee, the same in Bapton as everywhere else we work.

Stained shower tray resurfaced to clean white, before and after
Where
Bapton (BA12)
Area hub
Wiltshire
Guarantee
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

About Bapton

Bapton is about 9 miles south-east of Warminster, in Wiltshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Bapton is one of 425 towns and villages in Wiltshire where we work.

Postcode districts we cover here: BA12. Close by, we cover Codford St Mary (1 mile north-west), Codford St Peter (2 miles north-west), Sherrington (2 miles west), Upton Lovell (3 miles north-west) and Chitterne (4 miles north). Within a short drive, we also cover Salisbury (11 miles south-east), Trowbridge (15 miles north-west), Devizes (15 miles north), Westbury (11 miles north-west), Warminster (9 miles north-west) and Amesbury (11 miles east).

Local landmarks in Bapton

Our clients here include homes close to Church of St John the Baptist. Further afield, we also cover the area around East Castle (2.8 miles south-east). Green spaces nearby include Baverstock Juniper Bank.

Map of Bapton © OpenStreetMap contributors

What a repair cannot fix

We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Multiple cracks across the tray
  • Movement caused by a poor base, until the support is fixed
  • Plumbing leaks under the tray

Send us photos and we will tell you honestly.

Surfaces we repair

  • Acrylic
  • Stone resin
  • Ceramic
  • Enamelled steel
  • Cast iron

How it works

A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow a few hours for a repair, longer for a full resurface from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. The damaged area, or the entire tray, is cleaned and prepared.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. We colour-match the repair, or spray a new finish across the whole tray.
  5. The tray is left to cure and can normally be used the next day.

Before we arrive

  • Keep pets and children out of the room while we work
  • Tell us about any previous repairs or coatings
  • Keep a parking space free if you can

How to get a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Advice

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

When to call us in Bapton

Trays fitted on timber floors can crack if the floor moves, particularly if it wasn’t fully bedded. On concrete, an uneven base is the usual cause.

You may need us if you’ve spotted any of these:

  • Damage around the waste
  • Edge chips from dropped bottles
  • Scratches from cleaning or grit
  • Snagging damage in a new bathroom

What your quote should include

  • How to look after the finish
  • How your room will be protected
  • Whether a trained technician does the job
  • Whether they match the colour on site

How to compare quotes

Landlord and trade work in Bapton

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Landlords, letting agents and housing providers in Bapton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

What shower tray repair costs

Prices start from £95. Each job gets its own fixed price. These are the things that affect it:

  • The size and number of damaged areas
  • How easy the damage is to reach
  • How many items we do on one visit
  • Unusual colours or finishes

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your photos

A couple of clear pictures is all it takes. Try to include:

  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • Natural light rather than flash
  • One picture of the entire shower tray

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

What your shower tray is made of matters

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

Aftercare tips

Once the work has cured, treat it gently:

  • Rinse the tray after each shower
  • Reseal when the silicone splits or turns black
  • Don’t stand heavy bottles on the tray
  • Don’t ignore a tray that flexes

Store heavy bottles on a shelf, not on the tray, so they cannot be knocked over.

If the tray creaks or moves, get it checked, before it cracks.

FAQs for Bapton

Do the materials smell?

There may be a mild smell during the work, which fades afterwards.

How quickly can you book me in?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Is it OK to use a cracked tray?

Only if you are sure it is not leaking. Check the ceiling below for damp.

Can you repair something that is been repaired before?

Normally, yes. The old repair comes out first, so let us know about it.

What happens once I’ve sent photos?

We come back with a fixed quote, plus dates. There’s no obligation to book.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.