Kent · England

Shower Tray Repair for Bekesbourne Hill homes

Shower tray repair in and around Bekesbourne Hill: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A tray that flexes
  • A tray that looks tired however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Bekesbourne Hill

Bekesbourne Hill and the surrounding area

Bekesbourne Hill is about 3 miles south-east of Canterbury, in Kent. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Bekesbourne Hill is one of 922 towns and villages in Kent where we work. Our nearest city page is London, about 56 miles away.

Our visits in CT4 work the same way as everywhere else we cover. Streets in the area include Bekesbourne Hill and Oakleigh Lane, and we cover them all. Close by, we cover Patrixbourne (1 mile south), Bekesbourne (1 mile south-east), Bridge (1 mile south-west), Littlebourne (2 miles north-east) and Bishopsbourne (2 miles south). We also work in nearby towns such as Ashford (14 miles south-west), Canterbury (3 miles north-west), Margate (13 miles north-east), Dover (11 miles south-east), Folkestone (12 miles south) and Ramsgate (13 miles north-east).

What’s near Bekesbourne Hill

Around Bekesbourne Hill, we work in homes near Church of St Peter, St. Anselm's Catholic School and Chequer's Wood and Old Park. Bekesbourne Hill has its own railway station: Bekesbourne station. Nearby you will also find Canterbury Roman Museum (2.6 miles north-west) and St Martins Hospital (1.6 miles north-west). Not far away are Blean Woods RSPB Reserve.

Map of Bekesbourne Hill © OpenStreetMap contributors

Shower tray repair in Bekesbourne Hill, done in place

Stone resin, acrylic and ceramic trays can all be repaired, or resurface the entire tray if it’s worn. The tray stays in place, so the enclosure and tiles aren’t disturbed. Common call-outs are for movement when you stand on it and a tray that looks tired however much you clean it, on acrylic, cast iron and enamelled steel.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Location
Bekesbourne Hill (CT4)
Region
Kent
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What happens on the day

We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a few hours for a repair, longer for a full resurface. At the end we talk you through the curing time and the aftercare.

  1. First we check the tray is solid and work out why any crack happened.
  2. The damaged area, or the whole tray, is cleaned and prepared.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. The repair is colour-matched, or the whole tray gets a new finish.
  5. We leave it to cure; the shower is generally usable the following day.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Have somewhere for us to park nearby if possible
  • Ensure the room can be ventilated

Ask for a price

Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Bekesbourne Hill, and we will reply with a fixed price.

Send photos for a quote

Read more

Landlords, agents and businesses in Bekesbourne Hill

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Materials and what they mean for the repair

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Acrylic

Acrylic-capped trays are lighter, so good support matters. Cracks and scratches can be repaired.

Signs you need shower tray repair in Bekesbourne Hill

A tired-looking tray is frequently the result of years of cleaning: abrasive pads, strong chemicals and limescale strip the surface finish.

If you can see any of these, send us a picture:

  • Staining and dullness across the tray
  • Damage around the waste
  • Scuffs and light scratches
  • A cracked shower tray

Comparing quotes

  • Whether the price covers travel
  • How your room will be protected
  • How long the guarantee is and what it covers
  • What prep work is covered

Choosing a repair company

Looking after it afterwards

To keep it looking its best for years:

  • Don’t use strong acids or bleach
  • Don’t stand heavy bottles on the tray
  • Rinse away soap after showering
  • Clean with washing-up liquid and a soft cloth

Keep an eye on the sealant, and reseal when it starts to fail.

Stop using the shower if the tray is cracked. Water may be getting under the tray, where it causes damage you cannot see.

What affects the price in Bekesbourne Hill

Prices start from £95. We don’t charge extra for travel to Bekesbourne Hill. The price comes down to:

  • Doing more than one item at once
  • Any earlier repairs that need removing first
  • Access to the area
  • Unusual colours or finishes

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Getting a price from photos

We price nearly every job from photos. This is what to send:

  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare
  • A picture taken from further back

For a price in Bekesbourne Hill, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Repairing versus replacing in Bekesbourne Hill

Replacing a tray usually means refitting the screen, retiling and resealing. Repairing it avoids all of that. Prices start from £95. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • Typically one visit, start to finish
  • Straight answers about what a repair can do
  • A year’s guarantee on all work
  • Colour-matched on site

Take a look at our pricing.

Common questions in Bekesbourne Hill

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Can I keep using a cracked tray?

It’s best to stop using it until it’s checked, in case water is getting through.

Do you cover the entire of Kent?

All of Kent, and the rest of the UK. There is no extra charge for travel.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Do you reseal the tray as well?

Yes. We can repair and reseal on the same visit.

Can you make an old tray look new?

Yes. The entire tray can be resurfaced without removing it.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will do the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.