West Lothian · Scotland

Shower tray repair & resurfacing in Bellsquarry, West Lothian

Shower tray repair in and around Bellsquarry: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chipped corners or rims
  • A damaged area around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Bellsquarry

How we handle shower tray repair in Bellsquarry

Stone resin, acrylic and ceramic trays can all be repaired, or resurface the whole tray if it’s worn. Nothing is taken out, so the enclosure and tiles are not disturbed. If you’re dealing with damage around the waste and chips on the edges, we can generally put it right.

Every repair is covered by our one-year guarantee, wherever you are in West Lothian.

Discoloured square shower tray restored with a new white finish
Where
Bellsquarry (EH54, EH55)
Region
West Lothian
Cover
12 months on all our work
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

FAQs for Bellsquarry

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you reseal the tray as well?

Yes. Add it to your quote and we’ll do both on one visit.

Can you resurface a whole tray?

Yes. The whole tray can be resurfaced.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Are there extra charges for Bellsquarry?

We do not add a call-out fee. The fixed quote covers the visit and the work.

When can I use the shower again?

We will give you the curing time on the day.

Do you cover Bellsquarry?

Yes. We work across the UK and travel to Bellsquarry and the rest of West Lothian. Send us pictures for a fixed quote, or call 0345 017 0787.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Landlord and trade work in Bellsquarry

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Landlords, letting agents and housing providers in Bellsquarry use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

What shower tray repair costs

Prices start from £95. Every quote is fixed and free. What we look at:

  • The size and number of damaged areas
  • How hard the colour is to match
  • The material and finish
  • Whether we combine several jobs

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.

Getting a price from photos

We price nearly every job from pictures. This is what to send:

  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage
  • One picture of the whole shower tray

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

How to care for the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Replace failing sealant promptly
  • Keep the bathroom well ventilated
  • Use a mild, non-abrasive cleaner
  • Rinse the tray after each shower

Rinse the tray down after showering, clean with mild cleaners, and keep the sealant in good condition so water can’t get underneath.

A tray that moves underfoot needs looking at, before it cracks.

Common problems we fix in Bellsquarry

A tired-looking tray is often the result of years of cleaning: abrasive pads, strong chemicals and limescale wear the finish away.

Signs it’s time to call us include:

  • Chips caused during fitting
  • Damage around the waste
  • A tray that creaks or moves underfoot
  • A tray that looks tired however much you clean it

Before you book anyone

  • Who turns up on the day
  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled
  • If travel is included in the price

How to compare quotes

Different materials, different repairs

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips are filled and matched to the surface.

What we do, step by step

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours, or most of the day to resurface the whole tray. Before we leave, we explain how soon it can be used and how to look after it.

  1. The surrounding area is sheeted and masked.
  2. Old sealant is removed if it’s in the way.
  3. The tray is cleaned, keyed and repaired.
  4. We refinish the surface to match the tray.
  5. We clean up and give you the curing time.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive

How to get a price

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Related advice

Honest limits

A few problems are outside what a surface repair can do:

  • Plumbing leaks under the tray
  • Damage below the tray that needs a builder
  • Trays cracked in several places

If in doubt, send photos and we’ll say what we think before you book.

What we work on

  • Cast iron
  • Ceramic
  • Enamelled steel
  • Stone resin
  • Acrylic

Our work in Bellsquarry

Bellsquarry is about 2 miles south of Livingston, in West Lothian. Wherever you are in the EH54 postcode area, we come to you. Bellsquarry is one of 58 towns and villages in West Lothian we cover. You can also see our page for Edinburgh, about 13 miles away.

Here we cover the EH54 and EH55 postcode area. That includes homes on Bell Square, Adam Square and Calder Road. We also travel to Adambrae (1 mile north), Dedridge (1 mile north-east), Murieston (1 mile east), Polbeth (1 mile south-west) and Livingston Village (1 mile north). Larger places within reach include Bathgate (5 miles north-west), Linlithgow (8 miles north-west), Whitburn (6 miles west), East Calder (4 miles north-east), Broxburn (5 miles north) and Armadale (7 miles west).

Near you in Bellsquarry

Locally, our jobs take us to homes close to Inveralmond Community High School and St. Margaret's Academy and the streets around them. For rail, the closest station is Livingston South station, roughly 1 mile east. A little further out are Almond Valley Heritage Centre (1.4 miles north-west) and Livingston Designer Outlet (1 mile north). The countryside around Bellsquarry includes Dechmont Law.

Map of Bellsquarry © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.