West Lothian · Scotland
Bath re-enamelling & resurfacing in Bellsquarry, West Lothian
Damaged bath in Bellsquarry? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Bath re-enamelling at your home in Bellsquarry
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s an original cast iron bath that needs restoring and wear marks under the taps, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Bellsquarry (EH54, EH55)
- Area hub
- West Lothian
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Nothing complicated is needed:
- Rinse off hair dye, oils and bath bombs straight away
- Leave the bath for the full curing time before using it
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Let us know which floor the room is on
- Open a window if you can
- Ensure the area is dry
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Read more
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the whole surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Bellsquarry
- We come to you, anywhere in the UK
- Rooms protected and left tidy
- Fixed prices from your pictures
- Nothing taken out or refitted
Read our pricing and bath cost comparison.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair will not do:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Places near Bellsquarry
Also in Bellsquarry
Our work in Bellsquarry
Bellsquarry is about 2 miles south of Livingston, in West Lothian. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in all 58 towns and villages in West Lothian, from the larger towns to small villages. Our nearest city page is Edinburgh, about 13 miles away.
Every address in EH54 and EH55 is covered. That includes homes on Bell Square, Adam Square and Calder Road and the roads around them. We also travel to Adambrae (1 mile north), Dedridge (1 mile north-east), Murieston (1 mile east), Polbeth (1 mile south-west) and Livingston Village (1 mile north). Further out, we also cover Bathgate (5 miles north-west), Linlithgow (8 miles north-west), Whitburn (6 miles west), East Calder (4 miles north-east), Broxburn (5 miles north) and Armadale (7 miles west).
Landmarks near Bellsquarry
Typical jobs here are in homes near Inveralmond Community High School and St. Margaret's Academy. The nearest railway station is Livingston South station, about 1 mile east of the centre. Further afield, we also cover the area around Almond Valley Heritage Centre (1.4 miles north-west) and Livingston Designer Outlet (1 mile north). The countryside around Bellsquarry includes Dechmont Law.
Questions from Bellsquarry
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
How much does bath re-enamelling cost in Bellsquarry?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your EH54 postcode.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
What areas do you cover?
We work UK-wide, and that includes Bellsquarry. Our prices are the same everywhere.
When to call us in Bellsquarry
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- A coloured bath you want in white
- A bath that stays dull however much you clean it
What your quote should include
- What aftercare is recommended
- How the room is protected while they work
- Whether the colour is mixed to match
- Who will actually do the work
Landlord and trade work in Bellsquarry
We work for landlords, letting agents and housing providers in Bellsquarry as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
What affects the price in Bellsquarry
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- What kind of damage it is
- Doing more than one item at once
- The material and finish
- How much damage there is
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Getting a price from pictures
Two or three clear photos are usually enough. Try to include:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- One picture of the whole bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
