East Riding of Yorkshire · England
Shower Tray Repair in Bennetland
Shower tray repair for Bennetland, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A tray that flexes
- Chips caused during fitting
Shower tray repair at your home in Bennetland
Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. Whether it’s scratches from cleaning or grit and a dull, stained or worn surface, we can normally put it right, on cast iron, acrylic and stone resin alike.
Every repair is covered by our one-year guarantee, wherever you are in East Riding of Yorkshire.
- Where
- Bennetland (HU15, DN14)
- Region
- East Riding of Yorkshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Ceramic
Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.
Enamelled steel
Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.
Prices and what affects them
Repairs from £95. There’s no area surcharge for Bennetland. The price reflects:
- The material and finish
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- How hard the colour is to match
Our prices are the same across the UK, with no extra for Bennetland. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
We price nearly every job from photos. This is what to send:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- A wider photo showing the entire shower tray
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Keep the bathroom well ventilated
- Keep heavy bottles on a shelf
- Don’t ignore a tray that flexes
- Stick to gentle cleaners
Give the repair its full curing time before showering. After that, mild cleaners and good ventilation are all it needs.
Act on split sealant early. It lets water behind the tray and can damage the floor below.
Also in Bennetland
Landlords, agents and businesses in Bennetland
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What we are called out for in Bennetland
The waste is a common starting point for cracks, because that’s where the tray is weakest and the fitting puts pressure on it.
Clients generally contact us about:
- A tray that looks tired however much you clean it
- A crack across the base
- Chips caused during fitting
- Edge chips from dropped bottles
Comparing quotes
- How long it needs to cure
- Whether cleaning and preparation are in the price
- How your room will be protected
- Whether the colour is mixed to match
Honest limits
In fairness, some problems need a different fix:
- A tray broken in more than one place
- Movement caused by a poor base, until the support is fixed
- Water damage to the floor beneath the tray
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Stone resin
- Enamelled steel
- Cast iron
- Acrylic
- Ceramic
Bennetland and the surrounding area
Bennetland is about 6 miles north-east of Goole, in East Riding of Yorkshire. Wherever you are in the HU15 postcode area, we carry out the work at your property. We work in 299 places across East Riding of Yorkshire. Our jobs stretch from Bennetland to Leeds (about 33 miles away).
We cover every part of HU15 and DN14. From Mill Lane, Bennetland Lane and Clementhorpe Lane or a nearby road, we can come to you. We also travel to Bellasize (1 mile south), Gilberdyke (1 mile north-east), Greenoak (1 mile south-west), Scalby (1 mile north-east) and Sandholme (1 mile north). We also work in nearby towns such as Beverley (15 miles north-east), Goole (6 miles south-west), Pocklington (13 miles north), Hessle (13 miles east), Cottingham (14 miles east) and Market Weighton (8 miles north-east).
Near you in Bennetland
Typical jobs here are in homes near The Cross Keys pub and Gilberdyke Primary School and the streets around them. The closest station to Bennetland is Gilberdyke station, about 0.7 miles east of the centre. A little further out are Goole and District Hospital (5.6 miles south-west). For a walk, there is Blacktoft Sands RSPB reserve.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Questions from Bennetland
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover the whole of East Riding of Yorkshire?
We work UK-wide, and that includes Bennetland. Prices do not change with location.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
How much does shower tray repair cost in Bennetland?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Is a cracked shower tray safe to use?
We would stop using it until it’s repaired, in case water is getting through.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, or most of a day for a full resurface. We clean up when we’re done and tell you when it’s ready to use.
- We check the tray for movement first.
- The damaged area is cleaned and opened up.
- Cracks are reinforced and the damage filled.
- The repair is shaped, colour-matched and finished.
- We leave it to cure, normally until the following day.
How to prepare
- Clear the area around the damage
- Let us know if it has been repaired before
- Open a window if you can
Getting a price
If you are in Bennetland and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
