Lincolnshire · England

Shower Tray Repair in Bilsby

Shower tray repair in and around Bilsby: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Scratches from cleaning or grit
  • A crack across the base
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Bilsby

Shower tray repair in Bilsby, done in place

Every crack has a cause, and we find it first. A tray that moves needs its support sorting first, so the repair lasts. If you’re dealing with a damaged area around the waste and a dull, stained or worn surface, we can help, on enamelled steel, acrylic and cast iron alike.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.

Discoloured square shower tray restored with a new white finish
Area
Bilsby (LN13)
Area hub
Lincolnshire
Guarantee
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

When a repair isn’t the answer

To be straight with you, there are a few things a repair will not fix:

  • Multiple cracks across the tray
  • Movement caused by a poor base, until the support is fixed
  • Leaking waste fittings

Send us pictures and we will tell you honestly before booking.

Materials we repair

  • Cast iron
  • Acrylic
  • Enamelled steel
  • Stone resin
  • Ceramic

Repairs by material

Acrylic

Acrylic-capped trays are lighter, so a firm base is essential. Cracks and scratches can be repaired.

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.

How the visit works

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a few hours, or most of the day to resurface the whole tray. Before we leave, we explain how soon it can be used and how to care for it.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour matched and finished.
  5. We leave it to cure, normally until the following day.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Open a window if you can
  • Clear toiletries, mats and anything else from around the area

How to get a price

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

Covering Bilsby

Bilsby is about 9 miles north-west of Skegness, in Lincolnshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Bilsby is one of 732 places in Lincolnshire we cover.

Jobs in LN13 are booked in the same way as anywhere else. We regularly work on streets such as Thurlby Road, Back Lane and Sutton Road and the roads around them. If you’re just outside Bilsby, we cover Farlesthorpe (1 mile south), Markby (2 miles north-east), Bonthorpe (2 miles south), Huttoft (2 miles east) and Hannah (2 miles north-east). Further out, we also cover Louth (11 miles north-west), Skegness (9 miles south-east), Horncastle (14 miles west), Mablethorpe (6 miles north), Sutton on Sea (4 miles north-east) and Spilsby (8 miles south-west).

Local landmarks in Bilsby

Our clients here include homes close to Church of the Holy Trinity and John Spendluffe Foundation Technology College. Well-known places in the area include Alford and District War Memorial Cottage Hospital (1.8 miles west) and Mawthorpe Bygones Museum (2.1 miles south-west). Open spaces near Bilsby include Miles Cross Hill.

Map of Bilsby © OpenStreetMap contributors

What we are called out for in Bilsby

Trays crack mainly because they move: without a solid, level base underneath, it flexes each time someone stands on it. Dropped bottles cause most chips.

Common reasons people in Bilsby contact us include:

  • Cracks running from the waste
  • Movement when you stand on it
  • Staining and dullness across the tray
  • Chipped corners or rims

Before you book anyone

  • Whether the price is fixed and includes VAT
  • What the guarantee covers, and for how long
  • Whether the price covers travel
  • What happens if they find more damage

Our hiring checklist

Prices and what affects them

Repairs from £95. We charge the same across the UK, including Bilsby. What changes the price is:

  • The material
  • How easy the damage is to reach
  • The colour and finish to match
  • Any earlier repairs that need removing first

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

How to get a fixed quote

Almost every job we do is priced from pictures. This is what we need:

  • Daylight if possible, and no flash reflection
  • A clear, close picture of the problem area
  • Any details about the material
  • One picture of the entire shower tray

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Should you replace it?

The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. Repairing it takes one visit. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Bilsby

  • CHAS, Constructionline and SafeContractor accredited
  • Work done at your home or business
  • One visit for most repairs
  • Honest advice, even when it means no job

Take a look at our pricing.

Landlord and trade work in Bilsby

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Common questions in Bilsby

Can you replace the silicone at the same time?

We can. After a repair is a good time to reseal.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.

How long before I can shower?

Normally by the following day. We will tell you the exact time when we finish.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can I add another job to the visit?

Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.

Can you price it without visiting?

In nearly every case. If photos do not show enough, we’ll ask for another angle.

Is a cracked tray repairable?

Frequently. If the tray moves, the support needs fixing first.

Can you repair something that is been repaired before?

Most of the time. Tell us what was done before and we’ll plan for it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.