Aberdeenshire · Scotland
Shower tray repair & resurfacing in Birsemore, Aberdeenshire
Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Birsemore and across Aberdeenshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Scratches from cleaning or grit
- Staining and dullness across the tray
Repair or replace in Birsemore?
Replacing a tray generally means refitting the screen, retiling and resealing. Repairing it avoids all of that and costs far less. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
What you get with us
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
- Normally one visit, start to finish
- Everything repaired in place
See our prices page.
How we handle shower tray repair in Birsemore
Stone resin, acrylic and ceramic trays can all be repaired, or resurface the entire tray if it’s worn. The tray stays in place, so the screen and tiling stay as they are. Whether it’s a tray that flexes and a tray that looks tired however much you clean it, we can generally put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Birsemore (AB34)
- Area hub
- Aberdeenshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair will not do:
- Trays cracked in several places
- Water damage to the floor beneath the tray
- Leaking waste fittings
Not sure? Send photos and we will give you a straight answer.
What we work on
- Stone resin
- Cast iron
- Acrylic
- Ceramic
- Enamelled steel
Landlords, agents and businesses in Birsemore
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We are used to working with agents and managing companies. Send the address, photos and access details.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours, or most of the day to resurface the whole tray. If we find something your photos didn’t show, we will explain it before carrying on.
- We make sure the tray does not flex and look for the cause of any crack.
- Next we clean and prepare the tray.
- We fill and strengthen any chips or cracks and sand them smooth.
- We match the colour, or refinish the full tray.
- The tray is left to cure and can generally be used the next day.
How to prepare
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
How to get a price
Upload pictures of the damage and a wider shot of the entire item, and tell us you’re in Birsemore, and we’ll come back with a fixed quote.
Related advice
Covering Birsemore
Birsemore is about 11 miles west of Banchory, in Aberdeenshire. We travel to customers in Birsemore and the surrounding area, so you don’t need to take anything anywhere. Birsemore is one of 161 places in Aberdeenshire we cover. You can also see our page for Edinburgh, about 79 miles away.
We work across AB34. You will find streets such as Huntly Road, Bridge View Road and Charlestown Road, and we cover them all. Neighbouring places we cover include Aboyne (1 mile north), Dinnet (4 miles west), Kincardine O'Neil (4 miles east), Tarland (5 miles north-west) and Potarch (5 miles east). Further out, we also cover Banchory (11 miles east), Alford (12 miles north), Ballater (10 miles west) and Torphins (7 miles north-east).
What’s near Birsemore
We visit homes around St Machar's Parish Church and Aboyne Academy, among other places. Nearby you will also find Aboyne Hospital (0.9 miles north-east) and Aboyne Castle (1.2 miles north). The countryside around Birsemore includes Mortlich and Loch of Aboyne.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Report any creaking or movement early
- Use a mild, non-abrasive cleaner
- Rinse away soap after showering
- Replace failing sealant promptly
Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep the sealant in good condition so water cannot get underneath.
Act on split sealant early. Water gets behind and under the tray and can damage the floor below.
More services for Birsemore
Birsemore questions
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Can you make an old tray look new?
Yes. A full resurface makes a tired tray look fresh.
Can I keep using a cracked tray?
Not until you know the crack isn’t letting water through. Look for damp or stains below.
Do you work in Birsemore?
Yes, we do. We send a technician to Birsemore for every job, and the price is the same as everywhere else.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Prices and what affects them
Repairs from £95. There’s no charge for travel to Birsemore. The price comes down to:
- The type of damage
- How many items we do on one visit
- Any earlier repairs that need removing first
- The material and finish
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- A wider photo showing the whole shower tray
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, include your postcode and send them to us. What comes back is a fixed price, not a guess.
What we are called out for in Birsemore
Heavy bottles, shower heads and dropped razors chip trays, typically on the edges or near the plughole.
Send us a photo if you notice any of these:
- A dull, stained or worn surface
- Damage around the waste
- Chips on the edges
- Damage from a refit or building work
What to look for in a quote
- Who will actually do the work
- Whether the colour is mixed to match
- How to care for the finish
- Whether there are any call-out or travel charges
Different materials, different repairs
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
