Derbyshire · England

Shower tray repair & resurfacing in Bolsover, Derbyshire

Shower tray chip, crack and scratch repairs and resurfacing for householders, landlords and businesses in Bolsover. Free, fixed quotes from your photos.

  • Repairs from £95
  • Chipped corners or rims
  • A crack across the base
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Bolsover homes

Shower tray repair at your home in Bolsover

You don’t always need a new tray. If it’s solid underneath, it can generally be repaired in place, saving you the cost and mess of a new one. If you are dealing with chips or cracks by the plughole and staining and dullness across the tray, we can help.

Whatever the size of the job, it’s backed by a one-year guarantee.

Area
Bolsover (S44, S43, S80, NG20)
Area hub
Derbyshire
Guarantee
12 months on all our work
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Aftercare tips

To keep it looking its best:

  • Get a moving tray checked
  • Don’t use strong acids or bleach
  • Reseal when the silicone splits or turns black
  • Stick to gentle cleaners

Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.

A tray that moves underfoot needs looking at, before it cracks or gets worse.

Materials and what they mean for the repair

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

When a repair is not the answer

It helps to know what we can’t do too:

  • A tray that moves underfoot
  • Damage below the tray that needs a builder
  • Leaks from the waste or pipework (a plumber’s job)

If in doubt, send photos and we will say what we think before booking.

Materials we repair

  • Ceramic
  • Stone resin
  • Cast iron
  • Enamelled steel
  • Acrylic

What happens on the day

On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours, or most of a day for a full resurface, tidy-up included.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

How to prepare

  • Let the surface dry out before the visit
  • Keep pets and children out of the room while we work
  • Tell us about parking, stairs or access

How to get a price

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.

Send pictures for a quote

Related advice

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

Bolsover: your questions answered

Is my repair covered?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

How long before I can shower?

Usually the next day. We will tell you the exact time when we finish.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Bolsover.

Do you redo the sealant?

Yes. We can repair and reseal on the same visit.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do the materials smell?

Some materials have a smell while they’re applied. It clears as the materials cure.

Do you come to Bolsover?

Yes. We cover the whole UK and travel to Bolsover. Send pictures and we will quote, or call 0345 017 0787.

Repairing versus replacing in Bolsover

A new tray can be cheap, but fitting it is not: taking out the enclosure, tiling and resealing. A repair is one visit. Prices start from £95. The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.

Why choose Surface Doctor in Bolsover

  • We leave the room as we found it
  • Straight answers about what a repair can do
  • No extra charge for your area
  • No need to remove anything

See our pricing.

For landlords and businesses

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Prices and what affects them

Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:

  • The colour and finish to match
  • The material
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out

Our prices are the same across the UK, with no extra for Bolsover. The job itself decides the price: the material, the amount of damage and how many items.

How to get a fixed quote

Phone pictures are fine, there’s no need for anything special. Just ensure we can see:

  • Details of any past repairs
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • Something in shot to show the size

Getting a quote takes a couple of minutes: photograph the damage, then the entire shower tray, include your postcode and send them to us. You will get a fixed price, not an estimate.

Our work in Bolsover

Bolsover is about 6 miles east of Chesterfield, in Derbyshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. We work in all 532 towns and villages in Derbyshire, from the larger towns to small villages. We work right across the region, from Bolsover to Leeds (about 41 miles away).

Our visits in S44, S43, S80 and NG20 work the same way as everywhere else we cover. You’ll find streets such as High Street, New Station Road and Station Road. Bolsover sits on or near the A616 and A632, which makes travel easy. Neighbouring places we cover include Palterton (1 mile south), Shuttlewood (1 mile north), Oxcroft Estate (1 mile north), Scarcliffe (2 miles south-east) and Oxcroft (2 miles north). Further out, we also cover Chesterfield (6 miles west), Heanor (15 miles south), Dronfield (9 miles north-west), Ripley (14 miles south), Staveley (4 miles north-west) and Langley Mill (15 miles south).

Around Bolsover

We visit homes around Bolsover Infant School, The Bolsover School and Church of St Mary and St Lawrence. You’ll also find The Castle Arms (0.8 miles west) and The Bolsover School (0.6 miles south-east). The closest station to Bolsover is Langwith - Whaley Thorns station, roughly 3.2 miles east of the centre. Other landmarks nearby include Bolsover Castle (less than half a mile west) and Stainsby Mill (3.6 miles south-west).

Map of Bolsover © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.