Barnsley · England

Shower tray repair & resurfacing in Bolsterstone, Barnsley

Shower tray repair for Bolsterstone, without a refit. Get a fixed price from your photos, then we come to you.

  • Repairs from £95
  • Edge chips from dropped bottles
  • A tray that flexes
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Bolsterstone homes

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

How we handle shower tray repair in Bolsterstone

In most cases, a damaged tray can be repaired where it is, from a chip by the waste to a crack across the base. The colour and finish are matched. If you’re dealing with edge chips from dropped bottles and a dull, stained or worn surface, we can help, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Before and after: an old shower tray refinished by Surface Doctor
Area
Bolsterstone (S36)
Area hub
Barnsley
Cover
One year on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

Repair or replace: which is better?

The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Why book with us

  • Colours mixed by hand to suit your surface
  • Everything repaired in place
  • Work done at your home or business
  • We leave the room as we found it

See our prices page.

When we’d advise against a repair

It helps to know what we cannot do too:

  • A tray that flexes because it was never properly supported
  • Plumbing leaks under the tray
  • Trays cracked in several places

Not sure? Send photos and we will give you a straight answer before you book.

Surfaces we repair

  • Stone resin
  • Ceramic
  • Acrylic
  • Cast iron
  • Enamelled steel

What your shower tray is made of matters

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.

What we do, step by step

We begin by going over the job with you. Then the area is sheeted and masked and we start. It normally takes a few hours, or most of the day to resurface the whole tray, and we’ll tell you if anything changes.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Tell us about parking, stairs or access
  • Tell us about any previous repairs or coatings

Getting a price

A quote takes minutes to ask for: photograph the damage, then the entire shower tray, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Advice

Questions from Bolsterstone

Can a cracked shower tray be repaired?

Typically, if the tray is firmly supported. We reinforce the crack, fill it and refinish the surface.

What if the damage is worse than the pictures show?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

What happens once I’ve sent pictures?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before and we’ll plan for it.

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

About Bolsterstone

Bolsterstone is about 8 miles south-west of Barnsley, in Barnsley. Jobs in Bolsterstone are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 94 towns and villages across Barnsley, from the larger towns to small villages. You can also see our page for Leeds, about 24 miles away.

We work across S36 and the streets around it. Jobs here include addresses on Folderings Lane, Walders Lane and Stone Moor Road. We also travel to Ewden Village (1 mile south), Deepcar (1 mile north-east), Stocksbridge (1 mile north), Brightholmlee (2 miles south-east) and Green Moor (2 miles north). Larger places within reach include Barnsley (8 miles north-east), Wombwell (9 miles north-east), Wath upon Dearne (10 miles east), Shaw Lands (7 miles north-east), Hoyland (7 miles east) and Worsbrough (7 miles north-east).

Near you in Bolsterstone

Typical jobs here are in homes near Stocksbridge Junior School, Stocksbridge High School and St Mary's Church and the streets around them. For rail, the closest station is Penistone station, roughly 4.2 miles north of the centre. Other landmarks nearby include King Edward VII Orthopaedic Hospital (6 miles south). Not far away are Carr House Meadows.

Map of Bolsterstone © OpenStreetMap contributors

Common problems we fix in Bolsterstone

Dull and stained trays are generally down to cleaning: abrasive pads, strong chemicals and limescale strip the surface finish.

The most common problems we’re called about are:

  • Chips on the edges
  • A tray that looks tired however much you clean it
  • A tray that flexes
  • Damage around the waste

Before booking anyone

  • How the colour is matched
  • If travel is included in the price
  • Whether a trained technician does the job
  • Aftercare advice

Our hiring checklist

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

How we price shower tray repair

Prices start from £95. There is no area surcharge for Bolsterstone. The price reflects:

  • How much damage there is
  • Whether old repairs or coatings need taking off
  • How many items we do on one visit
  • What kind of damage it is

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

How to get a fixed quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Any details about the material
  • One sharp close-up of the damage
  • A wider photo showing the entire shower tray
  • A coin or ruler next to the damage for scale

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire shower tray, we can price the job the same day in most cases.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.