Northumberland · England
Shower Tray Repair in Bullers Green
Our repair technicians come to Bullers Green for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Damage from a refit or building work
- A crack across the base
Shower tray repair at your home in Bullers Green
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. Nothing is taken out, so the enclosure and tiles aren’t disturbed. Typical jobs include a crack across the base and movement when you stand on it, on enamelled steel, acrylic and ceramic.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Bullers Green (NE61)
- County
- Northumberland
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price shower tray repair
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- Unusual colours or finishes
- How many items we do on one visit
- The size and number of damaged areas
- Access to the area
We charge the same wherever you are, so there’s no premium for Bullers Green. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
Phone pictures are fine. Just make sure we can see:
- One sharp close-up of the damage
- Something in shot to show the size
- Any earlier repairs or coatings
- A wider photo showing the whole shower tray
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Bullers Green: your questions answered
Do you work in Bullers Green?
Yes, we do. Repair technicians travel to Bullers Green from across the region, and the price is the same as everywhere else.
Is a cracked tray repairable?
In most cases. A tray that moves needs its support sorting before the repair.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How long does it take to cure?
Normally by the following day. We will tell you the exact time when we finish.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Common problems we fix in Bullers Green
The waste is a common starting point for cracks, where the tray is cut and the fitting is tightened.
People typically call us when they notice something like this:
- Edge chips from dropped bottles
- Chips caused during fitting
- A tray that creaks or moves underfoot
- Chips or cracks by the plughole
What your quote should include
- What happens if the damage is worse than the photos show
- How long it needs to cure
- Whether the price covers travel
- Whether the price is fixed and includes VAT
Materials and what they mean for the repair
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.
Ceramic
Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.
Other services in Bullers Green
Work for landlords and builders
If you manage property in Bullers Green, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
What a repair cannot fix
A repair isn’t right for every job, including:
- Water damage to the floor beneath the tray
- Multiple cracks across the tray
- A tray that flexes because it was never properly supported
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Acrylic
- Enamelled steel
- Cast iron
- Stone resin
- Ceramic
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Covering Bullers Green
Bullers Green is about 1 mile north-west of Morpeth, in Northumberland. Across the NE61 area, we carry out the work at your property. Bullers Green is one of 189 towns and villages in Northumberland we cover. You can also see our page for Newcastle upon Tyne, about 13 miles away.
Our visits in NE61 are booked in the same way as anywhere else. From Beggar Lane, Peacock Lane and Kings Avenue or a nearby road, a technician can come to you. If you’re just outside Bullers Green, we cover Morpeth (1 mile south-east), Pegswood (2 miles east), Hepscott (2 miles south-east), Longhirst (2 miles north-east) and North Choppington (3 miles east). Larger places within reach include Blyth (8 miles south-east), Cramlington (7 miles south-east), Ashington (5 miles east), Bedlington (5 miles south-east), Newsham (8 miles south-east) and Amble (12 miles north).
Around Bullers Green
Our clients here include homes close to The King Edward VI Academy, Carlisle Park and St James the Great. Also close by are The King Edward VI Academy (less than half a mile north-east), Black & Grey pub (within half a mile south-east) and St Robert's Roman Catholic Voluntary Aided First School (less than half a mile south-east). For rail, the closest station is Morpeth station, roughly 0.8 miles south-east. Other landmarks nearby include Morpeth Castle (0.7 miles south-east) and Municipal Borough of Morpeth (less than half a mile south-east).
What we do, step by step
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. Allow a few hours, or most of the day to resurface the whole tray, and we will keep you posted as we go.
- We check the tray is firmly supported and find the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- We fill and reinforce chips and cracks, then sand them flush.
- We match the colour, or refinish the full tray.
- The tray is left to cure and can normally be used the next day.
Before we arrive
- Mention any parking restrictions or tricky access
- Ensure the room can be ventilated
- Keep a parking space free if you can
How to get a price
Upload photos of the damage and a wider shot of the entire item, and tell us you’re in Bullers Green, and we’ll come back with a fixed quote.
Read more
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Store bottles off the tray
- Ventilate the room after showers
- Use a mild, non-abrasive cleaner
- Check the seal every few months
Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.
Act on split sealant early. It lets water behind the tray and can damage the floor below.
About our accreditations · Every repair comes with a one-year guarantee.
