East Sussex · England

Shower tray repair & resurfacing in Bulverhythe, East Sussex

Shower tray chip, crack and scratch repairs and resurfacing for householders, landlords and businesses in Bulverhythe. Fixed quotes from your pictures.

  • Repairs from £95
  • Scuffs and light scratches
  • A dull, stained or worn surface
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Bulverhythe

About our shower tray repair in Bulverhythe

Shower tray repairs are one of our most common jobs. Chipped edges, cracks and worn finishes are all things we fix in place. We regularly repair enamelled steel, stone resin and cast iron, and people most often call us about a tray that looks tired however much you clean it and scratches from cleaning or grit.

Rural addresses like Bulverhythe just need a little planning, and we will organise the visit.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Where
Bulverhythe (TN38, TN40)
Area hub
East Sussex
Warranty
A year, on every repair
Price
From £95. Fixed, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What your shower tray is made of matters

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and we match the gloss when we repair them.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so it’s worth repairing early.

For landlords and businesses

If you manage property in Bulverhythe, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

What we cannot put right

We’ll always be straight with you, so here’s what a repair won’t do:

  • Multiple cracks across the tray
  • Leaking waste fittings
  • Rotten or damaged flooring underneath

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Enamelled steel
  • Stone resin
  • Ceramic
  • Acrylic
  • Cast iron

Bulverhythe: your questions answered

I let a flat near West St Leonards station. Can you help between tenants?

Of course: photos and an address are all we need for a price, and we can arrange access with the tenant if that helps.

Do you take on commercial work in Bulverhythe?

Yes, we work for schools, leisure centres and businesses. Send pictures and details of the building.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

Are there extra charges for Bulverhythe?

Travel is included in the price, with the same prices everywhere we work.

Can you price it without visiting?

In nearly every case. If photos don’t show enough, we will ask for another angle.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

What happens once I’ve sent photos?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

How we price shower tray repair

Repairs from £95. There’s no area surcharge for Bulverhythe. The price reflects:

  • Access to the area
  • The material
  • Doing more than one item at once
  • Previous DIY repairs that have to come out

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.

Quotes from your pictures

A couple of clear pictures is all it takes. It helps if you send:

  • Natural light rather than flash
  • Any details about the material
  • Details of any past repairs
  • A clear, close picture of the problem area

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Repairing versus replacing in Bulverhythe

Replacing a tray normally means refitting the screen, retiling and resealing. A repair leaves all of that untouched and costs far less. Replacement in Bulverhythe means trades, travel and waste removal, while shower tray repair is one trip.

Our shower tray repair starts from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

What you get with us

  • Rooms protected and left tidy
  • We come to you, anywhere in the UK
  • A fixed quote before booking
  • Colours mixed by hand to suit your surface

See our Pricing.

What happens on the day

Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, or most of a day for a full resurface. Before leaving, we tell you when it can be used and what to avoid for the first few days. For a rural address like Bulverhythe, we plan the journey in advance: tell us about narrow lanes, gates, long drives or where to park. We bring everything needed for the shower tray repair, so there is no second trip.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Preparing for the visit

  • Let the surface dry out before the visit
  • Tell us about parking, stairs or access
  • Have a window or extractor fan available

Getting a price

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Send pictures for a quote

Advice

Shower tray repair around Bulverhythe

If you manage a building such as The St Leonards Academy, we repair changing-room showers as well as work in homes. Rented homes near West St Leonards station (about 0.8 miles east) change hands often, and repairing shower trays between tenants is quicker than replacing them.

Bulverhythe is about 1 mile west of St Leonards, in East Sussex. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Bulverhythe is one of 289 places in East Sussex where we work. Our nearest city page is London, about 52 miles away.

All of TN38 and TN40 is covered for shower tray repair, from the main roads to the quietest streets. That includes homes on Haven Road, Bexhill Road and Arnside Road and the roads around them. Other places close to Bulverhythe include St Leonards (1 mile east), Silverhill (2 miles north-east), Hollington (2 miles north-east), Green Street (2 miles north) and Hastings (2 miles north-east). We also work in nearby towns such as Eastbourne (11 miles south-west), Hailsham (12 miles west), Polegate (12 miles west), Hastings Old Town (3 miles east), Old Town (12 miles south-west) and Belmont (3 miles east).

Near you in Bulverhythe

Around Bulverhythe, we work in homes near The Bull Inn, Filsham Reedbed and West St Leonards Primary Academy and the streets around them. For rail, the closest station is West St Leonards station, about 0.8 miles east. Nearby you’ll also find Hastings Castle (2.7 miles east) and Priory Meadow Shopping Centre (2.6 miles east). The countryside around Bulverhythe includes Senlac Hill and Church Wood and Robsack Wood.

Map of Bulverhythe © OpenStreetMap contributors

Looking after it afterwards

Aftercare is simple, and it makes a real difference:

  • Clean with washing-up liquid and a soft cloth
  • Use the extractor fan
  • Check the seal every few months
  • Store bottles off the tray

Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.

Stop using the shower if the tray is cracked. Water can get through to the floor and walls, where it causes damage you cannot see.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.