Essex · England

Shower Tray Repair for Bures homes

Shower tray repair in Bures without the cost of replacing. Get a fixed price from your pictures, then book a visit.

  • Repairs from £95
  • A tray that flexes
  • A tray that looks tired however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Bures

How we handle shower tray repair in Bures

A worn or stained tray can be resurfaced, for a clean, uniform finish. Whether it’s a tray that looks tired however much you clean it and a damaged area around the waste, we can help, on ceramic, stone resin and acrylic alike.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Bures (CO8)
County
Essex
Warranty
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

For landlords and businesses

We work for landlords, letting agents and housing providers in Bures as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Why repair rather than replace?

A new tray can be cheap, but fitting it is not: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Repairs from £95, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Most jobs done in one visit
  • Colours mixed by hand to suit your surface
  • No need to remove anything
  • Rooms protected and left tidy

Take a look at our full price list.

Your questions about shower tray repair in Bures

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

When can I use the shower again?

We will give you the curing time on the day, typically the following day.

Do you redo the sealant?

Yes. Add it to your quote and we’ll do both on one visit.

Can you make an old tray look new?

Yes. We can resurface the whole tray for a fresh finish.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Can I keep using a cracked tray?

Not until you know the crack is not letting water through. Look for damp or stains below.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Do you work in Bures?

Yes. We cover the whole UK and travel to Bures. Send pictures and we’ll quote, or call 0345 017 0787.

When we would advise against a repair

Before you book, it’s worth knowing the limits too:

  • A tray that flexes because it was never properly supported
  • Trays cracked in several places
  • Damage below the tray that needs a builder

If in doubt, send pictures and we will say what we think before you book.

What we work on

  • Acrylic
  • Stone resin
  • Ceramic
  • Cast iron
  • Enamelled steel

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What shower tray repair costs

Prices start from £95. Prices are worked out job by job. What matters most is:

  • How hard the colour is to match
  • What the surface is made of
  • Any earlier repairs that need removing first
  • Whether we combine several jobs

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.

How to get a fixed price

Two or three clear pictures are usually enough. Try to include:

  • Where you are, by postcode
  • Natural light rather than flash
  • A wider photo showing the whole shower tray
  • The material, if you know it

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

How it works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which generally takes a few hours, or most of a day for a full resurface. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. We clean and prepare the damaged area or the entire tray.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. We colour-match the repair, or spray a new finish across the entire tray.
  5. We leave it to cure; the shower is typically usable the day after.

Getting ready for the visit

  • Clear the area around the damage
  • Ensure the area is dry
  • Point us to the nearest place to park

How to get a price

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a free quote

Related advice

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Do not ignore a tray that flexes
  • Rinse the tray after each shower
  • Use the extractor fan
  • Don’t stand heavy bottles on the tray

Keep heavy bottles off the tray floor, to avoid chips.

Stop using the shower if the tray is cracked. Water can get through to the floor and walls, and the damage below is not visible.

Where we work around Bures

Bures is about 5 miles south of Sudbury, in Essex. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Bures is one of 644 towns and villages in Essex we cover. We work right across the region, from Bures to London (50 miles away).

Every address in CO8 is within our area, from the main roads to the quietest streets. That includes homes on Church Square, High Street and Bridge Street. We also travel to Bures Green (1 mile north-east), Mount Bures (1 mile south), Lamarsh (1 mile north-west), Alphamstone (2 miles north-west) and Cross End (3 miles west). Further out, we also cover Colchester (8 miles south-east), Braintree (11 miles south-west), Witham (13 miles south-west), Camulodunum (7 miles south-east), Halstead (6 miles west) and Greenstead (9 miles south-east).

Local landmarks in Bures

Around Bures, we work in homes near Church of St Mary the Virgin, Tiger Hill and Three Horseshoes Inn, among other places. There is a railway station in Bures itself: Bures station. Well-known places in the area include Mount Bures (0.9 miles south). Green spaces nearby include Sergeants Orchard.

Map of Bures © OpenStreetMap contributors

When to call us in Bures

The waste is a common starting point for cracks, where the tray is cut and the fitting is tightened.

You may need us if you’ve spotted any of these:

  • Scuffs and light scratches
  • Damage from a refit or building work
  • Staining and dullness across the tray
  • Chipped corners or rims

Comparing quotes

  • Whether cleaning and preparation are in the price
  • What the guarantee covers, and for how long
  • Who will actually do the work
  • What aftercare is recommended

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.