Hampshire · England
Shower Tray Repair in Burley Street
Fixed-price shower tray repair in Burley Street and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- A cracked shower tray
- Staining and dullness across the tray
About our shower tray repair in Burley Street
In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. We match the colour and finish. Common call-outs are for chips on the edges and a tray that creaks or moves underfoot, on enamelled steel, cast iron and acrylic.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Area
- Burley Street (BH24)
- County
- Hampshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Burley Street
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you cover Burley Street?
Yes, we do. We send a technician to Burley Street for every job, and the price is the same as everywhere else.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is it OK to use a cracked tray?
It’s best to stop using it until it’s checked, in case water is getting through.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What we do, step by step
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, or most of a day for a full resurface, and we leave the room as we found it.
- We make sure the tray doesn’t flex and look for the cause of any crack.
- Next we clean and prepare the tray.
- We fill and reinforce chips and cracks, then sand them flush.
- We colour-match the repair, or spray a new finish across the whole tray.
- Once cured, normally by the next day, you can use the shower.
Before we arrive
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
Keeping it looking good
It’s all simple stuff:
- Do not ignore a tray that flexes
- Check the seal every few months
- Use a mild, non-abrasive cleaner
- Keep harsh chemicals off the tray
Keep an eye on the sealant, and replace it when it splits or goes black.
Every shower forces a little water into a crack, which can damage the floor over time. Getting it repaired quickly is much cheaper than fixing a floor.
Common problems we fix in Burley Street
Rigid trays do not bend, they crack when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.
Get in touch if you’ve noticed:
- Movement when you stand on it
- A cracked shower tray
- A dull, stained or worn surface
- Edge chips from dropped bottles
Before you book anyone
- How to look after the finish
- The length of the guarantee and what it covers
- How soon you can use it again
- Whether the colour is mixed to match
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What your shower tray is made of matters
Stone resin
Stone resin trays are rigid and slim. A flat, solid base is essential, and we match repairs to the surface finish.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A tray that moves underfoot
- A tray broken in more than one place
- Leaking waste fittings
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Ceramic
- Stone resin
- Acrylic
- Cast iron
- Enamelled steel
Landlord and trade work in Burley Street
For anyone letting property in or around Burley Street, we will quote for several properties at once. Just send photos for each address and we’ll price them together.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What shower tray repair costs
Repairs from £95. There is no area surcharge for Burley Street. What changes the price is:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How many areas need work
- Whether it’s a chip, crack, burn or wear
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire shower tray
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say straight away if a repair is the right fix.
Places near Burley Street
Also in Burley Street
Our work in Burley Street
Burley Street is about 7 miles north of Christchurch, in Hampshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Burley Street is one of 683 towns and villages in Hampshire we cover.
Here we cover the BH24 postcode area. Jobs here include addresses on Tyrells Lane, Ringwood Road and Forest Road. We also cover the places around Burley Street: Burley (1 mile south-east), Foulford (2 miles north-west), Forest Corner (2 miles north-west), Shobley (2 miles north-west) and Bagnum (2 miles south-west). We also work in nearby towns such as Totton (11 miles north-east), Lymington (9 miles south-east), Romsey (15 miles north-east), Hythe (14 miles east), New Milton (6 miles south) and Ringwood (3 miles west).
Around Burley Street
In Burley Street, that means homes near Burley Street Mission Hall, The Queen's Head pub and Burley Primary School. Open spaces near Burley Street include Linbrook Lake and Blashford Lakes.
About our accreditations · Every repair comes with a one-year guarantee.
