Dundee · Scotland
Shower Tray Repair in Burnside of Duntrune
Our technicians come to Burnside of Duntrune for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A tray that creaks or moves underfoot
- Scratches from cleaning or grit
Common problems we fix in Burnside of Duntrune
Heavy bottles, shower heads and dropped razors chip trays, generally along the edges or by the waste.
You may need us if you’ve spotted:
- Edge chips from dropped bottles
- A damaged area around the waste
- A cracked shower tray
- A dull, stained or worn surface
What to look for in a quote
- Whether they match the colour on site
- When it can be used again
- Is the price fixed, and does it include VAT?
- Who turns up on the day
How we handle shower tray repair in Burnside of Duntrune
Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. We work on acrylic, cast iron and enamelled steel, and people most often call us about damage from a refit or building work and a tray that flexes.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Burnside of Duntrune (DD4, DD5)
- Region
- Dundee
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Burnside of Duntrune
Other services in Burnside of Duntrune
What shower tray repair costs
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- What kind of damage it is
- Any earlier repairs that need removing first
- The material
- How much damage there is
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Where you are, by postcode
- One picture of the entire shower tray
- The material, if you know it
- Good light, ideally daylight, without flash glare
For a price in Burnside of Duntrune, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Burnside of Duntrune: your questions answered
Do you cover the whole of Dundee?
We work UK-wide, and that includes Burnside of Duntrune. Our prices are the same everywhere.
Is a cracked tray repairable?
Typically, as long as it doesn’t flex. We reinforce the crack, fill it and refinish the surface.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Is a cracked shower tray safe to use?
Not until you know the crack is not letting water through. Look for damp or stains below.
Do you reseal the tray as well?
Yes. We can repair and reseal on the same visit.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Are there extra charges for Burnside of Duntrune?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Store bottles off the tray
- Don’t ignore a tray that flexes
- Replace failing sealant promptly
- Stick to gentle cleaners
Rinse the tray after use, clean with mild cleaners, and keep the sealant in good condition so water can’t get underneath.
Every shower forces a little water into a crack, which can damage the floor over time. An early repair is far cheaper than floor repairs.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About Burnside of Duntrune
Burnside of Duntrune is about 3 miles north-west of Broughty Ferry, in Dundee. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Burnside of Duntrune is one of 50 towns and villages in Dundee we cover. We work right across the region, from Burnside of Duntrune to Edinburgh (40 miles away).
We work across DD4 and DD5. If you are just outside Burnside of Duntrune, we cover Ballumbie (1 mile south), Whitfield (1 mile south-west), Pitkerro (2 miles south-west), Bucklerheads (2 miles north-east) and Douglas (2 miles south). Larger places within reach include Dundee (3 miles south-west), Broughty Ferry (3 miles south-east), Stobswell (3 miles south-west), Monifieth (3 miles east), Blackness (4 miles south-west) and Barnhill (3 miles south-east).
What’s near Burnside of Duntrune
Typical jobs here are in homes near Braeview Academy. Burnside of Duntrune’s nearest station is Broughty Ferry station, roughly 2.8 miles south-east of the centre. Nearby you’ll also find Maryfield Hospital (2.6 miles south-west) and Ballumbie Castle (0.5 miles east). Green spaces nearby include Balgay Hill and Trottick Mill Ponds.
The process
Arrival times are agreed in advance. Once we are there, the work takes a few hours, or most of the day to resurface the whole tray in most cases. The room is left tidy.
- First we check the tray is solid and work out why any crack happened.
- The damaged area, or the whole tray, is cleaned and prepared.
- We fill and strengthen any chips or cracks and sand them smooth.
- We match the colour, or refinish the full tray.
- The tray is left to cure and can generally be used the next day.
Preparing for the visit
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Movement caused by a poor base, until the support is fixed
- Leaking waste fittings
- Water damage to the floor beneath the tray
If in doubt, send photos and we’ll say what we think.
What we work on
- Enamelled steel
- Cast iron
- Stone resin
- Ceramic
- Acrylic
Materials and what they mean for the repair
Acrylic
Acrylic-capped trays are lighter, so good support matters. We repair cracks and scratches.
Stone resin
Stone resin trays are rigid and slim. A flat, solid base is essential, and we match repairs to the surface finish.
About our accreditations · Every repair comes with a one-year guarantee.
