Devon · England
Shower Tray Repair in Burscott
Shower tray repair across Burscott and nearby, normally in one visit and guaranteed for a year.
- Repairs from £95
- Chips caused during fitting
- Chips on the edges
What your shower tray is made of matters
Enamelled steel
Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and we match repairs to the surface finish.
Shower tray repair in Burscott without replacing anything
Shower tray repairs are one of our most common jobs. Chipped edges, cracks and worn finishes can all be put right without removing the tray. Our repair technicians work on stone resin, ceramic and cast iron, and people most often call us about scratches from cleaning or grit and snagging damage in a new bathroom.
You get a one-year guarantee, the same in Burscott as everywhere else we work.
- Area
- Burscott (EX39)
- County
- Devon
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Burscott
On timber floors, movement can crack a tray, especially if the tray wasn’t bedded properly. On solid floors, cracks typically point to an uneven base.
People generally call us when they notice something like this:
- Movement when you stand on it
- Cracks running from the waste
- Scratches in the surface
- Chips or cracks by the plughole
Questions to ask before booking
- What prep work is covered
- A fixed quote, and whether VAT is included
- What the guarantee covers, and for how long
- How long it needs to cure
The process
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours for a repair, longer for a full resurface, and the room is left clean and tidy.
- We check the tray for movement first.
- We clean the damage and open it up so the repair can bond.
- We reinforce any crack and fill the damage.
- We shape the repair, match the colour and finish it.
- It’s left to cure, typically until the day after.
Getting ready for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
What we can’t put right
To be straight with you, there are a few things a repair will not fix:
- Water damage to the floor beneath the tray
- Movement caused by a poor base, until the support is fixed
- Multiple cracks across the tray
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron
- Ceramic
- Stone resin
- Enamelled steel
- Acrylic
Where we work around Burscott
Burscott is about 8 miles west of Bideford, in Devon. Whether you’re in the middle of Burscott or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in all 586 towns and villages across Devon, from the larger towns to small villages.
Jobs in EX39 are booked in the same way as anywhere else. That includes homes on Wrinkleberry Lane and Winsworthy and the roads around them. Other places close to Burscott include Higher Clovelly (1 mile north-west), Clovelly (1 mile north), Woolfardisworthy (2 miles south-east), Buck's Cross (2 miles east) and Hartland (3 miles west). Within a short drive, we also cover Bideford (8 miles east), Braunton (13 miles north-east), Roundswell (15 miles east), East-the-Water (9 miles east), Northam (9 miles north-east) and Westward Ho! (8 miles north-east).
Near you in Burscott
Typical jobs here are in homes near St Peter's Chapel and The New Inn Hotel. Green spaces nearby include Meddon Green Local Nature Reserve.
Why repair rather than replace?
Replacing a tray normally involves taking out the enclosure and tiles, preparing a new base and tiling again. A repair or resurface leaves all of that alone. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- One visit for most repairs
- Same prices wherever you are
- Free fixed quotes from pictures
- Rooms protected and left tidy
Read our pricing.
Places near Burscott
Also in Burscott
Aftercare tips
So the finish stays in good condition:
- Store bottles off the tray
- Reseal when the silicone splits or turns black
- Rinse the tray after each shower
- Use the extractor fan
Give the repair its full curing time before showering. After that, mild cleaners and good ventilation are all it needs.
Do not keep using a cracked tray. Water may be getting under the tray, and the damage below isn’t visible.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Burscott use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Common questions in Burscott
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
How do I get a price for shower tray repair in Burscott?
Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.
Do you come to Burscott?
Yes. We work across the UK and travel to Burscott. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
