Devon · England
Bath Re-enamelling in Burscott
Full bath re-enamelling and resurfacing in Burscott, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
Aftercare tips
So the finish stays in good condition for years:
- Have chips seen to early
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs right away
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
About our bath re-enamelling in Burscott
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s an original cast iron bath that needs restoring and a peeling or bubbling previous coating, we can generally put it right, on cast iron baths, Victorian roll-tops and acrylic baths alike.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Burscott (EX39)
- Area hub
- Devon
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Burscott
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
More services for Burscott
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Make sure the area is dry
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Related advice
When to call us in Burscott
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
It’s worth getting a quote if you see:
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- Several chips and rust patches
- Brown or grey marks that do not clean off
Before booking anyone
- Whether the price covers travel
- What the guarantee covers, and for how long
- How soon you can use it again
- Who will actually do the work
Burscott and nearby
Burscott is about 8 miles west of Bideford, in Devon. Our repair technicians come to homes and businesses in Burscott, so nothing has to leave your home. Burscott is one of 586 towns and villages in Devon we cover.
Here we cover the EX39 postcode area. Local streets include Wrinkleberry Lane and Winsworthy, and we cover them all. Other places close to Burscott include Higher Clovelly (1 mile north-west), Clovelly (1 mile north), Woolfardisworthy (2 miles south-east), Buck's Cross (2 miles east) and Hartland (3 miles west). We also work in nearby towns such as Bideford (8 miles east), Braunton (13 miles north-east), Roundswell (15 miles east), East-the-Water (9 miles east), Northam (9 miles north-east) and Westward Ho! (8 miles north-east).
Near you in Burscott
Our customers here include homes close to St Peter's Chapel and The New Inn Hotel. For a walk, there’s Meddon Green Local Nature Reserve.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- How much damage there is
- What the surface is made of
- What kind of damage it is
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- A close-up of the damage, in focus
- What it’s made of, if you know
If you’re in Burscott and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Questions from Burscott
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I get a price for bath re-enamelling in Burscott?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we will ask for another angle.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Repairing versus replacing in Burscott
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
- Most jobs done in one visit
See our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
