East Riding of Yorkshire · England

Shower tray repair & resurfacing in Bursea, East Riding of Yorkshire

Shower tray repair for Bursea, without a refit. Get a fixed price from your pictures, then we come to you.

  • Repairs from £95
  • Scratches from cleaning or grit
  • Damage around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Bursea homes

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Shower tray repair at your home in Bursea

Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. We match the colour and finish. We are often asked to fix scuffs and light scratches and a dull, stained or worn surface, on enamelled steel, ceramic and stone resin.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Before and after: an old shower tray refinished by Surface Doctor
Area
Bursea (YO43)
Area hub
East Riding of Yorkshire
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

Keeping it looking good

It’s all simple stuff:

  • Replace failing sealant promptly
  • Rinse the tray after each shower
  • Use the extractor fan
  • Keep heavy bottles on a shelf

Check the silicone around the tray every few months, and reseal when it starts to fail.

Act on split sealant early. Water gets behind and under the tray and can cause damage underneath.

What happens on the day

You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a few hours for a repair, longer for a full resurface, and you can get on with other things while we’re there.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour-matched and finished.
  5. It’s left to cure, typically until the next day.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Let the surface dry out before the visit
  • Tell us if there are stairs or a lift

How to get a price

To get a price, send two or three pictures using our quote form or call us. We’ll say right away if a repair is the right fix.

Get a free quote

Read more

Work for landlords and builders

For anyone letting property in or around Bursea, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Materials and what they mean for the repair

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base isn’t fully supported, and chips can be filled and matched.

Ceramic

Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and the repair is polished to match the shine.

Do you need shower tray repair in Bursea?

Most cracked trays are trays that flex: without a solid, level base underneath, it flexes each time someone stands on it. Dropped bottles cause most chips.

The most common problems we’re called about are:

  • A tray that creaks or moves underfoot
  • Snagging damage in a new bathroom
  • Scuffs and light scratches
  • A cracked shower tray

Comparing quotes

  • How soon you can use it again
  • What prep work is covered
  • How changes to the job are handled
  • Aftercare advice

10 questions to ask before you book

Bursea: your questions answered

Do you cover Bursea?

Yes. We work across the UK and travel to Bursea and the rest of East Riding of Yorkshire. Send photos and we’ll quote, or call 0345 017 0787.

Do you reseal the tray as well?

Yes. We can repair and reseal on the same visit.

How do I book?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you redo someone else’s repair?

Normally, yes. We remove the old repair before doing a new one.

Which areas do you work in?

We cover the whole UK, including Bursea and the rest of East Riding of Yorkshire. Send your postcode with your pictures and we will confirm dates.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

About Bursea

Bursea is about 6 miles south-west of Market Weighton, in East Riding of Yorkshire. We travel to homes and businesses in Bursea and nearby villages, so there’s no workshop to go to. We cover all 299 towns and villages across East Riding of Yorkshire. Our jobs stretch from Bursea to Leeds (about 32 miles away).

Postcode districts we cover here: YO43. Neighbouring places we cover include Hive (2 miles south-east), Sandholme (2 miles south-east), Eastrington (2 miles south), Newland (3 miles south) and Gilberdyke (3 miles south-east). Within a short drive, we also cover Beverley (15 miles east), Goole (7 miles south-west), Pocklington (9 miles north), Hessle (14 miles east), Cottingham (15 miles east) and Market Weighton (6 miles north-east).

Local landmarks in Bursea

Bursea’s nearest station is Eastrington station, about 2.7 miles south of the centre. Not far away are North Cave Wetlands.

Map of Bursea © OpenStreetMap contributors

How we price shower tray repair

Prices start from £95. You’ll know the full cost before booking. We take into account:

  • What kind of damage it is
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • What the surface is made of

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

The better the pictures, the more accurate the price. Here’s what helps:

  • The postcode, so we can plan the visit
  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • Natural light rather than flash

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Movement caused by a poor base, until the support is fixed
  • Damage below the tray that needs a builder
  • Plumbing leaks under the tray

Send us photos and we will tell you honestly.

Surfaces we repair

  • Cast iron
  • Ceramic
  • Enamelled steel
  • Stone resin
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.