Hampshire · England
Shower Tray Repair in Conford
Shower tray chip, crack and scratch repairs and resurfacing in Conford, carried out at your home and guaranteed for a year.
- Repairs from £95
- A tray that creaks or moves underfoot
- A damaged area around the waste
How we price shower tray repair
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- Unusual colours or finishes
- How easy the damage is to reach
- The type of damage
- How much damage there is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
When you take your pictures, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- The material, if you know it
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About our shower tray repair in Conford
We check the tray before repairing it: a tray that moves needs its support sorted first, or the crack will come back. We will tell you if that’s the case. We are often asked to fix a tray that creaks or moves underfoot and chips or cracks by the plughole, across cast iron, enamelled steel and acrylic.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Conford (GU30)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What else we do in Conford
What your shower tray is made of matters
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.
Enamelled steel
Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so it’s worth repairing early.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Keep the bathroom well ventilated
- Reseal when the silicone splits or turns black
- Don’t use strong acids or bleach
- Rinse the tray after each shower
Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.
Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can damage the floor below.
Landlord and trade work in Conford
We regularly work with letting and managing agents. Send the address, pictures and access details.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Where we work around Conford
Conford is about 2 miles south-east of Bordon, in Hampshire. Anywhere in GU30, we come to you. Conford is one of 683 towns and villages in Hampshire where we work. We work right across the region, from Conford to London (about 42 miles away).
Postcode districts we cover here: GU30. We also travel to Passfield (1 mile north-west), Weavers Down (1 mile south), Liphook (1 mile south-east), Longmoor (2 miles south-west) and Woolmer (2 miles west). Larger places within reach include Farnborough (14 miles north), Fleet (13 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (8 miles north-west) and Petersfield (8 miles south-west).
What’s near Conford
Locally, our jobs take us to homes close to Liphook Infant School and Bohunt School. For rail, the closest station is Liphook station, about 1.8 miles south-east. Other landmarks nearby include Chase Community Hospital (1.9 miles north-west). Not far away are Wheeler's Down and Deadwater Valley.
Your questions about shower tray repair in Conford
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Is a cracked tray repairable?
Usually, as long as it doesn’t flex. The crack is reinforced, filled and refinished.
Can you price it without visiting?
Nearly always. If photos do not show enough, we’ll ask for another angle.
How much does shower tray repair cost in Conford?
Repairs from £95. We give a fixed price based on photos of the damage. Send a close-up and a picture of the entire item with your GU30 postcode.
Do you reseal the tray as well?
Yes, if you’d like us to. After a repair is a good time to reseal.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Why repair rather than replace?
Replacing a tray normally involves removing the screen and tiling, relaying the base and tiling again. A repair or resurface leaves all of that alone. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Conford customers choose us
- We leave the room as we found it
- One-year guarantee on every repair
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
Read our full price list.
When to call us in Conford
Most cracked trays are trays that flex: if a tray wasn’t bedded on a solid, even base, it flexes each time someone stands on it. Chips typically come from dropped bottles.
These are the problems we’re asked about most:
- Snagging damage in a new bathroom
- Chipped corners or rims
- Damage around the waste
- A tray that creaks or moves underfoot
Comparing quotes
- Who turns up on the day
- Aftercare advice
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
The process
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours for a repair, longer for a full resurface, and we leave the room as we found it.
- We ensure the tray does not flex and look for the cause of any crack.
- Next we clean and prepare the tray.
- Chips and cracks are filled, reinforced and sanded level.
- We colour-match the repair, or spray a new finish across the whole tray.
- The tray is left to cure and can usually be used the day after.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Tell us if there are stairs or a lift
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
