Devon · England
Shower Tray Repair for Crapstone homes
Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Crapstone and across Devon. Free, fixed quotes from your pictures.
- Repairs from £95
- Staining and dullness across the tray
- Damage from a refit or building work
How we handle shower tray repair in Crapstone
Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces are all things we fix in place. We are frequently asked to fix damage around the waste and damage from a refit or building work, in ceramic, stone resin and enamelled steel.
Every job is backed for twelve months in Crapstone and everywhere else. If something goes wrong with the work, we come back.
- Where
- Crapstone (PL20)
- Region
- Devon
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:
- Multiple cracks across the tray
- Damage below the tray that needs a builder
- A tray that moves underfoot
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Enamelled steel
- Stone resin
- Acrylic
- Ceramic
- Cast iron
Towns and villages near Crapstone
Also in Crapstone
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Give the tray a quick rinse after use
- Clean with washing-up liquid and a soft cloth
- Do not use strong acids or bleach
- Store bottles off the tray
Wait the full curing time before you shower. After that, gentle cleaning and good ventilation keep it in good shape.
Stop using the shower if the tray is cracked. Water may be getting under the tray, and the damage below is not visible.
Our work in Crapstone
Crapstone is about 4 miles south of Tavistock, in Devon. Whether you’re in the middle of Crapstone or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Crapstone is one of 586 towns and villages in Devon where we work.
Our visits in PL20 are booked in the same way as anywhere else. Whether you live on Jubilee Drive, Stoke Hill Lane and The Glade or anywhere nearby, a technician can come to you. Close by, we cover West Devon (1 mile south-east), Buckland Monachorum (1 mile west), Milton Combe (1 mile south-west), Roborough (3 miles south) and Bere Alston (4 miles west). We also work in nearby towns such as Tavistock (4 miles north), Ivybridge (11 miles south-east), Buckfastleigh (14 miles east), South Brent (13 miles east), Yealmpton (11 miles south-east) and Tiddy Brook Meadows (3 miles north).
Landmarks near Crapstone
We visit homes around Leg O'Mutton Inn, St Andrew's Church of England Primary School and Church of St Andrew and the streets around them. For rail, the closest station is Bere Alston station, about 3.9 miles west. Further afield, we also cover the area around Yelverton Paperweight Centre (0.9 miles east) and Tavistock Hospital (4.3 miles north-west). Open spaces near Crapstone include Berra Tor.
Different materials, different repairs
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.
How we price shower tray repair
Repairs from £95. You’ll know the full cost before you book. We look at:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- How easy the damage is to reach
- How much damage there is
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Send pictures for a quote
When you take your pictures, these tips help us give you a firm price:
- Any earlier repairs or coatings
- Where you are, by postcode
- One sharp close-up of the damage
- What it’s made of, if you know
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
FAQs for Crapstone
What happens once I’ve sent photos?
We come back with a fixed price. You are under no obligation.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can you fix a cracked tray?
In most cases. A tray that moves needs its support sorting before the repair.
What areas do you cover?
We work UK-wide, so Crapstone is covered. Prices do not change with location.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does it take to cure?
You will get the exact time when we finish, typically the following day.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Signs you need shower tray repair in Crapstone
The waste is a common starting point for cracks, where the tray is cut and the fitting is tightened.
Look out for these signs:
- A dull, stained or worn surface
- Scuffs and light scratches
- Chipped corners or rims
- Chips or cracks by the plughole
What to look for in a quote
- Whether they match the colour on site
- Whether the price covers travel
- When it can be used again
- Is the price fixed, and does it include VAT?
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours, or most of a day for a full resurface.
- First we check the tray is solid and work out why any crack happened.
- The damaged area, or the entire tray, is cleaned and prepared.
- We fill and reinforce chips and cracks, then sand them flush.
- We match the colour, or refinish the full tray.
- The tray is left to cure and can usually be used the day after.
How to prepare
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
