Greater London · England

Shower Tray Repair in Crossness

Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Crossness and across Greater London. Free, fixed quotes from your photos.

  • Repairs from £95
  • Chipped corners or rims
  • Cracks running from the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Crossness?

Common questions in Crossness

Is it OK to use a cracked tray?

It’s best to stop using it until it’s checked, because water may be getting underneath.

What does shower tray repair cost?

Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Do you charge for travel?

We do not add a call-out fee. The fixed price covers the visit and the work.

Can a cracked shower tray be repaired?

Frequently. If the tray moves, the support needs fixing first.

It’s been repaired before. Can you still fix it?

Yes, we often do. It can add a little time, which we include in the quote.

Can you make an old tray look new?

Yes. The entire tray can be resurfaced without removing it.

Do you work in Crossness?

Yes. We work across the UK and travel to Crossness and the rest of Greater London. Send photos and we will quote, or call 0345 017 0787.

How long before I can shower?

We’ll give you the curing time on the day, typically the following day.

Shower tray repair in Crossness, done in place

Stone resin, acrylic and ceramic trays can all be repaired, and worn trays can be resurfaced completely. The tray stays in place, so the enclosure and tiles are not disturbed. Common call-outs are for scratches in the surface and movement when you stand on it, across ceramic, acrylic and enamelled steel.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Area
Crossness (SE2, SE28, DA18)
County
Greater London
Warranty
A year, on every repair
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

How to care for the repair

Simple care helps the repair last. We recommend:

  • Store bottles off the tray
  • Keep the bathroom well ventilated
  • Check the seal every few months
  • Give the tray a quick rinse after use

Keep heavy bottles off the tray floor, to avoid chips.

Act on split sealant early. It lets water behind the tray and can damage the floor below.

How we price shower tray repair

Prices start from £95. There’s no area surcharge for Crossness. What changes the price is:

  • How many areas need work
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match

We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

Almost every job we do is priced from pictures. This is what to send:

  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • One picture of the entire shower tray

Getting a quote takes a couple of minutes: photograph the damage, then the entire shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.

Should you replace it?

When the tray is firm and dry underneath, repair is the obvious choice. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Straight answers about what a repair can do
  • No extra charge for your area
  • One visit for most repairs

Take a look at our pricing.

When we’d advise against a repair

In fairness, there are a few things a repair will not fix:

  • A tray that flexes because it was never properly supported
  • Trays cracked in several places
  • Plumbing leaks under the tray

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Cast iron
  • Acrylic
  • Enamelled steel
  • Stone resin
  • Ceramic

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours, or most of the day to resurface the whole tray from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. The surface is refinished to match.
  5. We clean up and give you the curing time.

Preparing for the visit

  • Let us know if it has been repaired before
  • Keep a parking space free if you can
  • Clear the area around the damage

Get a quote

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Related advice

When to call us in Crossness

The waste is a common starting point for cracks, because that is where the tray is weakest and the fitting puts pressure on it.

Keep an eye out for any of the following:

  • Cracks running from the waste
  • Chips caused during fitting
  • Movement when you stand on it
  • A tray that looks tired however much you clean it

What your quote should include

  • How the room is protected while they work
  • A fixed price, and whether VAT is included
  • How to look after the finish
  • Whether the colour is mixed to match

Our hiring checklist

About Crossness

Crossness is about 2 miles north-west of Erith, in Greater London. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our technicians cover all 764 towns and villages in Greater London, from the larger towns to small villages. Our jobs stretch from Crossness to London (10 miles away).

We cover every part of SE2, SE28 and DA18. Streets in the area include Kale Road, Haldane Road and Seacourt Road, all of which we cover. With the A2016 close by, Crossness is easy for our repair technicians to reach. Other places close to Crossness include Thamesmead (1 mile north-west), Dagenham Dock (1 mile north), Barking Riverside (2 miles north-west), Hornchurch Marshes (2 miles north-east) and Dagenham Green (2 miles north). We also work in nearby towns such as London (10 miles west), City of Westminster (12 miles west), Marylebone (12 miles west), Kensington (14 miles west), St Pancras (11 miles west) and Shoreditch (9 miles west).

Local landmarks in Crossness

We visit homes around Lesnes Abbey Woods, Church of the Cross and Belvedere Working Mens Club pub and the streets around them. Other local landmarks include Harris Garrard Academy (less than half a mile south) and St John Fisher Catholic Primary School (under half a mile south). The nearest railway station is Abbey Wood station, roughly 0.8 miles south-west. Well-known places in the area include Gallions Reach Shopping Park (2.4 miles west) and Greenwich Borough Museum (1.7 miles south-west). For a walk, there’s Crossness Nature Reserve.

  • Other local spots include River (1.9 miles north-east)
Map of Crossness © OpenStreetMap contributors

Work for landlords and builders

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.