Surrey · England
Shower Tray Repair in Deepcut
Shower tray repair in Deepcut without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Chipped corners or rims
- A damaged area around the waste
Common problems we fix in Deepcut
Trays crack mainly because they move: if a tray wasn’t bedded on a solid, even base, every shower puts strain on it. Dropped bottles cause most chips.
Clients generally contact us about:
- A damaged area around the waste
- Staining and dullness across the tray
- Cracks running from the waste
- Chips caused during fitting
Before booking anyone
- What prep work is covered
- Who will actually do the work
- How the room is protected while they work
- How to look after the finish
How we handle shower tray repair in Deepcut
Before repairing a crack, we find out why it happened. A tray that moves needs its support sorting first, so the repair lasts. If you’re dealing with a damaged area around the waste and scratches from cleaning or grit, we can generally put it right, on enamelled steel, stone resin and cast iron alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Deepcut (GU16)
- Area hub
- Surrey
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Don’t use strong acids or bleach
- Report any creaking or movement early
- Ventilate the room after showers
- Replace failing sealant promptly
Rinse the tray down after showering, clean with mild cleaners, and keep an eye on the sealant so water can’t get underneath.
Act on split sealant early. It lets water behind the tray and can damage the floor below.
How we price shower tray repair
Prices start from £95. We do not charge extra for travel to Deepcut. The price depends on:
- The material
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- What kind of damage it is
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from photos
You can generally get a fixed quote without us visiting. To make it quick:
- Any details about the material
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Natural light rather than flash
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Different materials, different repairs
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours for a repair, longer for a full resurface, and the room is left clean and tidy.
- We check the tray for movement first.
- We clean the damage and open it up so the repair can bond.
- Cracks are reinforced and the damage filled.
- The repair is shaped, colour matched and finished.
- It’s left to cure, generally until the following day.
Before we arrive
- Open a window if you can
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire shower tray, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
Your questions about shower tray repair in Deepcut
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens next?
You will get a fixed quote back. There’s no obligation to book.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you resurface a whole tray?
Yes. A full resurface makes a tired tray look fresh.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Are there extra charges for Deepcut?
Travel is included in the price, with the same prices everywhere we work.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can a cracked shower tray be repaired?
In most cases. A tray that moves needs its support sorting before the repair.
Repair or replace: which is better?
Replacing a tray usually means taking out the enclosure and tiles, relaying the base and re-tiling. Repairing or resurfacing the tray leaves all of that alone. Our shower tray repair starts from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- Everything repaired in place
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- A fixed quote before booking
Take a look at our prices page.
What a repair cannot fix
We will always be straight with you, so here’s what a repair can’t fix:
- Damage below the tray that needs a builder
- A tray that flexes because it was never properly supported
- A tray broken in more than one place
Not sure? Send photos and we will give you a straight answer.
What we work on
- Cast iron
- Ceramic
- Enamelled steel
- Acrylic
- Stone resin
Our work in Deepcut
Deepcut is about 1 mile east of Frimley, in Surrey. Our repair technicians come to homes and businesses in Deepcut and the surrounding area, so you do not need to take anything anywhere. We cover 395 places in Surrey. We work right across the region, from Deepcut to London (about 29 miles away).
We work across the GU16 postcode area. From Deepcut Bridge Road, The Royal Way and Newfoundland Road or anywhere nearby, a technician can come to you. Other places close to Deepcut include Frimley (1 mile west), Frimley Green (1 mile south-west), Camberley (2 miles north-west), Watchmoor (3 miles west) and Old Dean (3 miles north). Further out, we also cover Guildford (7 miles south-east), Woking (6 miles east), Farnham (8 miles south-west), Egham (11 miles north-east), Walton-on-Thames (14 miles east) and Staines-upon-Thames (12 miles north-east).
Near you in Deepcut
In Deepcut, that means homes near Tomlinscote School, Frimley Lodge Park and Tomlinscote School, among other places. Deepcut’s nearest station is Farnborough North station, about 1.9 miles west of the centre. Well-known places in the area include Frimley Park Hospital (1.9 miles west) and The Museum of The National Rifle Association (2 miles east). Open spaces near Deepcut include Danger Hill and Ash Ranges.
What else we do in Deepcut
About our accreditations · Every repair comes with a one-year guarantee.
