Somerset · England
Shower tray repair & resurfacing in Dulverton, Somerset
Shower tray chip, crack and scratch repairs and resurfacing for homeowners, landlords and businesses in Dulverton. Send pictures for a free, fixed quote.
- Repairs from £95
- Scratches in the surface
- Edge chips from dropped bottles
Work for landlords and builders
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Shower tray repair in Dulverton, done in place
We check the tray before repairing it: if it flexes underfoot, the cause needs sorting before any repair, or the crack will come back. We’ll explain what we find. Our technicians work on acrylic, ceramic and enamelled steel, and the jobs we see most are snagging damage in a new bathroom and chips or cracks by the plughole.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Dulverton (TA22)
- Area hub
- Somerset
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a few hours, or most of the day to resurface the whole tray. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We ensure the tray doesn’t flex and look for the cause of any crack.
- Next we clean and prepare the tray.
- We fill and reinforce chips and cracks, then sand them flush.
- We colour-match the repair, or spray a new finish across the entire tray.
- The tray is left to cure and can usually be used the day after.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Get a quote
If you’re in Dulverton and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Dulverton and the surrounding area
Dulverton is about 10 miles north of Tiverton, in Somerset. We visit homes and businesses in Dulverton, so you do not need to take anything anywhere. Dulverton is one of 640 places in Somerset we cover.
We cover every part of TA22 and the streets around it. Jobs here include addresses on High Street, Hollam Drive and Fishers Mead and the roads around them. You’ll find Dulverton on the B3222 and B3223, which makes it straightforward to reach. Close by, we cover Brushford (1 mile south), Bury (2 miles east), Morebath (3 miles south-east), Waddicombe (3 miles west) and Brompton Regis (3 miles north-east). Further out, we also cover Minehead (12 miles north), Wellington (14 miles east), Watchet (13 miles north-east), Wiveliscombe (10 miles east), Williton (13 miles north-east) and Rockwell Green (14 miles east).
Near you in Dulverton
Locally, our jobs take us to homes close to Woods pub, All Saints CofE VC Infants School and Church of All Saints and the streets around them. Well-known places in the area include Brewer's Castle (2.5 miles north-west). For a walk, there is Wimbleball Lake.
When a repair isn’t the answer
In fairness, there are a few things a repair won’t fix:
- Multiple cracks across the tray
- A tray that moves underfoot
- Leaks from the waste or pipework (a plumber’s job)
Send us photos and we will tell you honestly.
Materials we work on in Dulverton
- Stone resin
- Acrylic
- Cast iron
- Enamelled steel
- Ceramic
Also near Dulverton
What else we do in Dulverton
What your shower tray is made of matters
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips can be filled and matched.
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and we match the gloss when we repair them.
FAQs for Dulverton
Do you work in Dulverton?
Yes, we do. Technicians travel to Dulverton from across the region, with no extra charge for travel.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
How do I get a price for shower tray repair in Dulverton?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you redo the sealant?
Yes. We can repair and reseal on the same visit.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Looking after it afterwards
Once the work has cured, treat it gently:
- Clean with washing-up liquid and a soft cloth
- Rinse the tray after each shower
- Get a moving tray checked
- Check the seal every few months
Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
Repair or replace: which is better?
The tray itself may not cost much, but the work around it does: taking out the enclosure, tiling and resealing. A repair is one visit. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why us?
- Colour mixed on the day to match
- No need to remove anything
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
Read our full price list.
What we’re called out for in Dulverton
Stone resin trays are rigid, so they crack rather than bend if the floor beneath them is not flat and fully supported. Movement in a timber floor has the same effect.
If you can see any of these, send us a photo:
- A tray that looks tired however much you clean it
- Scratches from cleaning or grit
- Damage around the waste
- Chips caused during fitting
Before booking anyone
- Whether a trained technician does the job
- When it can be used again
- What happens if the damage is worse than the photos show
- What prep work is covered
Can I fix it myself?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
