Swansea · Wales

Shower tray repair & resurfacing in Felindre, Swansea

Shower tray chip, crack and scratch repairs and resurfacing for householders, landlords and businesses in Felindre. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Scratches in the surface
  • Chips or cracks by the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Felindre

How we handle shower tray repair in Felindre

Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. The colour and finish are matched so the repair blends in. If you are dealing with chips on the edges and snagging damage in a new bathroom, we can help.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Stained shower tray resurfaced to clean white, before and after
Location
Felindre (SA5)
Region
Swansea
Warranty
A year, on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

How to care for the repair

Much of the damage we repair could have been avoided. These habits help:

  • Get a moving tray checked
  • Avoid strong descalers and bleach
  • Keep heavy bottles on a shelf
  • Check the seal every few months

Rinse the tray down after showering, clean with mild cleaners, and keep the sealant in good condition so water cannot get underneath.

Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can cause damage underneath.

What affects the price in Felindre

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • The type of damage
  • Whether we combine several jobs
  • What the surface is made of
  • The size and number of damaged areas

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Getting a price from pictures

You can take the pictures on your phone. Make sure they show:

  • Any earlier repairs or coatings
  • Your postcode, so we can check dates
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole shower tray, we can price the job the same day in most cases.

Repair or replace in Felindre?

The tray itself may not cost much, but the work around it does: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Prices start from £95. Our prices are the same across the UK, with no extra for Felindre. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Felindre

  • One price list for the entire UK
  • One-year guarantee on every repair
  • We will tell you if it’s not worth repairing
  • Colour mixed on the day to match

See our prices page.

Felindre: your questions answered

Is a cracked tray repairable?

Typically, if the tray is firmly supported. We reinforce the crack, fill it and refinish the surface.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Do you come to Felindre?

Yes. We cover the entire UK and travel to Felindre and the rest of Swansea. Send pictures and we will quote, or call 0345 017 0787.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

What does shower tray repair cost?

Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Common problems we fix in Felindre

Rigid trays don’t bend, they crack if the floor beneath them is not flat and fully supported. Timber floors that move can cause it too.

People typically call us when they notice one of these:

  • Chips or cracks by the plughole
  • Scuffs and light scratches
  • Damage from a refit or building work
  • A tray that flexes

Before you book anyone

  • What protection goes down before work starts
  • A fixed quote, and whether VAT is included
  • How long it needs to cure
  • Whether the colour is mixed to match

Choosing a repair company

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

The process

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a few hours for a repair, longer for a full resurface. Before we go, we’ll explain when it can be used and how to care for it.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, generally until the day after.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Keep children and pets away from the room on the day
  • Keep a parking space free if you can

Ask for a price

To get a price, send two or three photos using our quote form or call us. We will say right away whether it can be repaired.

Get a free quote

Related advice

Felindre and nearby

Felindre is about 4 miles north-east of Gorseinon, in Swansea. Wherever you are in the SA5 postcode area, we carry out the work at your property. Felindre is one of 153 towns and villages in Swansea we cover.

All of SA5 is covered. Other places close to Felindre include Tyn-y-cwm (1 mile west), Llwyncelyn (2 miles east), Rhyd-y-gwin (2 miles east), Craig-cefn-parc (2 miles east) and Garnswllt (4 miles north). We also work in nearby towns such as Swansea (5 miles south), Castle (6 miles south), Morriston (3 miles south-east), Mount Pleasant (6 miles south), Gorseinon (4 miles south-west) and Dyfaty (6 miles south).

Around Felindre

Locally, our jobs take us to homes close to Shepherds Arms and the streets around them. Felindre’s nearest station is Pontarddulais station, about 3.1 miles west of the centre. Further afield, we also cover the area around Morriston Hospital (2.5 miles south-east) and Hughs Castle (3.1 miles west). Open spaces near Felindre include Pluck Lake and Cwm Clydach RSPB Reserve.

Map of Felindre © OpenStreetMap contributors

Different materials, different repairs

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • A tray that flexes because it was never properly supported
  • Rotten or damaged flooring underneath
  • Leaks from the waste or pipework (a plumber’s job)

Send us pictures and we will tell you honestly before you book.

Materials we work on in Felindre

  • Acrylic
  • Ceramic
  • Enamelled steel
  • Cast iron
  • Stone resin
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.