Monmouthshire · Wales
Shower Tray Repair for Gilwern homes
We travel to Gilwern for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Scratches in the surface
- Chips caused during fitting
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Gilwern, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
Shower tray repair at your home in Gilwern
You don’t always need a new tray. If it’s firmly supported, we can repair it where it is, saving you the cost and mess of a new one. Our repair technicians work on enamelled steel, stone resin and cast iron, and people most often call us about edge chips from dropped bottles and a tray that flexes.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Location
- Gilwern (NP7)
- Area hub
- Monmouthshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price shower tray repair
Repairs from £95. We price every job individually. The main factors are:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Getting a price from photos
Phone photos are fine, there’s no need for anything special. Make sure they show:
- Your postcode, so we can check dates
- A picture taken from further back
- Any earlier repairs or coatings
- Any details about the material
Most clients in Gilwern get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Repairs by material
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Should you replace it?
The tray is typically the last thing fitted and the first thing tiled up to, so replacing one disturbs a lot around it. Repairing it avoids that disruption. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- A fixed quote before you book
- Nothing taken out or refitted
Take a look at our pricing.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Stick to gentle cleaners
- Avoid strong descalers and bleach
- Ventilate the room after showers
- Check the seal every few months
Give the repair its full curing time before showering. After that, mild cleaners and good ventilation are all it needs.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. Allow a few hours, or most of the day to resurface the whole tray, and we’ll tell you if anything changes.
- We make sure the tray doesn’t flex and look for the cause of any crack.
- The damaged area, or the entire tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- We colour-match the repair, or spray a new finish across the entire tray.
- We leave it to cure; the shower is generally usable the next day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
FAQs for Gilwern
Can you replace the silicone at the same time?
Yes. Add it to your quote and we’ll do both on one visit.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Do the materials smell?
There may be a mild smell during the work.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
How much does shower tray repair cost in Gilwern?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Covering Gilwern
Gilwern is about 3 miles west of Abergavenny, in Monmouthshire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover all 115 towns and villages across Monmouthshire. You can also see our page for Birmingham, about 68 miles away.
Jobs in NP7 are booked in the same way as anywhere else. Local streets include Church Road, Dan-y-Bont and Crickhowell Road, and we cover them all. We also travel to Lower Common (1 mile north), Govilon (1 mile south-east), Llanwenarth (2 miles east), Cantref (3 miles east) and Llanfoist (3 miles east). Further out, we also cover Abergavenny (3 miles east), Pen-y-pound (3 miles east), Usk (12 miles south-east), Mardy (4 miles east), Llanbadoc (12 miles south-east) and Raglan (11 miles south-east).
Near you in Gilwern
We visit homes around Parish Church of St Elli, The Corn Exchange Inn and Gilwern C.P. School, among other places. The closest station to Gilwern is Abergavenny station, roughly 3.7 miles east of the centre. Further afield, we also cover the area around Battle Tump (0.5 miles north) and Llanwenarth Ultra (1.3 miles south-east). Green spaces nearby include Mynydd Llanwenarth and Pwll Gwy-rhoc.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Damage below the tray that needs a builder
- Multiple cracks across the tray
- Leaks from the waste or pipework (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Stone resin
- Ceramic
- Cast iron
- Enamelled steel
- Acrylic
Places near Gilwern
What else we do in Gilwern
About our accreditations · Every repair comes with a one-year guarantee.
