Derbyshire · England

Shower tray repair & resurfacing in Hatton, Derbyshire

Shower tray chip, crack and scratch repairs and resurfacing at your home in Hatton, with a one-year guarantee on every repair.

  • Repairs from £95
  • Chips caused during fitting
  • Edge chips from dropped bottles
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Hatton

Shower tray repair in Hatton without replacing anything

The first thing we do is check the tray: a tray that moves needs its support sorted first, or the crack will come back. We will tell you if that is the case. Typical jobs include a tray that creaks or moves underfoot and a crack across the base, on enamelled steel, acrylic and cast iron.

Every repair is covered by our one-year guarantee.

Stained shower tray resurfaced to clean white, before and after
Location
Hatton (DE65)
Region
Derbyshire
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

How we price shower tray repair

Repairs from £95. You won’t pay by the hour. The price depends on:

  • What the surface is made of
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

Quotes from your pictures

Photographing the damage takes a minute. Try to send:

  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode
  • One picture of the entire shower tray

Getting a quote takes a couple of minutes: photograph the damage, then the whole shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.

Where we work around Hatton

Hatton is about 5 miles north of Burton upon Trent, in Derbyshire. Anywhere in DE65, a technician comes to you. Hatton is one of 532 towns and villages in Derbyshire where we work. Our jobs stretch from Hatton to Birmingham (29 miles away).

Our visits in DE65 are booked in the same way as anywhere else. We regularly work on streets such as Station Road, Eaton Close and Hassall Road. Nearby, we also work in Hatton Fields (1 mile north-east), Tutbury (1 mile south), Marston on Dove (1 mile east), Alder Moor (2 miles south) and Burntheath (2 miles north-east). We also work in nearby towns such as Swadlincote (8 miles south-east), Belper (14 miles north-east), Ashbourne (10 miles north), Woodville (9 miles south-east), Upper Midway (8 miles south-east) and Midway (8 miles south-east).

Around Hatton

We visit homes around All Saints, The de Ferrers Academy and The Leopard pub. Hatton has its own railway station: Tutbury & Hatton station. Well-known places in the area include Tutbury Castle (0.8 miles south-west) and Tutbury Museum (1 mile south).

Map of Hatton © OpenStreetMap contributors

Landlords, agents and businesses in Hatton

We regularly work with letting and managing agents. Send the address, pictures and access details.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

How to look after the repair

It’s all simple stuff:

  • Ventilate the room after showers
  • Get a moving tray checked
  • Avoid strong descalers and bleach
  • Store bottles off the tray

Keep scourers and harsh chemicals off the tray. Warm water and a mild detergent is enough.

Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can cause damage underneath.

When a repair is not the answer

It helps to know what we can’t do too:

  • A tray that flexes because it was never properly supported
  • A tray broken in more than one place
  • Leaking waste fittings

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Stone resin
  • Ceramic
  • Enamelled steel
  • Cast iron
  • Acrylic

What we’re called out for in Hatton

A tired-looking tray is frequently the result of years of cleaning: limescale, harsh chemicals and abrasive pads wear the finish away.

Send us a photo if you notice any of these:

  • Chips on the edges
  • A tray that looks tired however much you clean it
  • Damage from a refit or building work
  • Scratches in the surface

Questions to ask before you book

  • Whether a trained technician does the job
  • Whether the price covers travel
  • How the room is protected while they work
  • How long it needs to cure

10 questions to ask before booking

Why repair rather than replace?

A new shower tray typically means removing the screen and tiling, preparing a new base and re-tiling. A repair or resurface keeps all of that in place. Our shower tray repair starts from £95. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why us?

  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • Nothing taken out or refitted
  • CHAS, Constructionline and SafeContractor accredited

Read our pricing.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Questions from Hatton

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

Do you work in Hatton?

Yes. We cover the entire UK and travel to Hatton and the rest of Derbyshire. Send photos and we’ll quote, or call 0345 017 0787.

Can you make an old tray look new?

Yes. We can resurface the whole tray for a fresh finish.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Will the price change on the day?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Is there a call-out fee?

There’s no separate call-out charge. Your fixed price includes everything.

The process

There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours for a repair, longer for a full resurface, including clearing up.

  1. We ensure the tray doesn’t flex and look for the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. The repair is colour-matched, or the entire tray gets a new finish.
  5. The tray is left to cure and can usually be used the next day.

How to prepare

  • Let us know about parking or access
  • Keep children and pets away from the room on the day
  • Move bottles, mats and clutter away from the area

How to get a price

To get a price, send two or three pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.