Cornwall · England

Shower Tray Repair for Higher Bal homes

Local shower tray repair for Higher Bal: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A dull, stained or worn surface
  • A damaged area around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Higher Bal

How we handle shower tray repair in Higher Bal

Every crack has a cause, and we find it first. A tray that moves needs its support sorting first, so the crack doesn’t come back. Common call-outs are for a cracked shower tray and chips caused during fitting, on enamelled steel, cast iron and stone resin.

We stand behind the work with a one-year guarantee.

Area
Higher Bal (TR5)
Area hub
Cornwall
Cover
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What your shower tray is made of matters

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

FAQs for Higher Bal

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Can you fix a cracked tray?

Usually, as long as it doesn’t flex. The crack is reinforced, filled and refinished.

Can I keep using a cracked tray?

Only if you’re sure it isn’t leaking. Check the ceiling below for damp.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Is repairing better than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

Can you replace the silicone at the same time?

Yes, if you’d like us to. It’s a good time to replace old sealant.

Will the price change on the day?

Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.

Where we work around Higher Bal

Higher Bal is about 5 miles north of Redruth, in Cornwall. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our repair technicians cover all 644 towns and villages across Cornwall, from the larger towns to small villages.

All of TR5 is covered. We also travel to St Agnes (1 mile east), Goonvrea (1 mile south), Goonown (1 mile south-east), Wheal Kitty (1 mile north-east) and Goonbell (1 mile south-east). Within a short drive, we also cover Truro (8 miles south-east), Newquay (10 miles north-east), Falmouth (13 miles south-east), Camborne (8 miles south-west), Redruth (5 miles south) and Helston (15 miles south).

Local landmarks in Higher Bal

Typical jobs here are in homes near St Agnes ACE Academy and Church of St Agnes. A little further out are Camborne Redruth Community Hospital (5.9 miles south) and St Agnes Museum (0.7 miles south-east). Not far away are St Agnes Beacon.

Map of Higher Bal © OpenStreetMap contributors

Landlords, agents and businesses in Higher Bal

Housing associations and facilities teams use us for planned and reactive repairs in Cornwall and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.

What happens on the day

There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours for a repair, longer for a full resurface.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour matched and finished.
  5. It’s left to cure, generally until the next day.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Tell us about parking, stairs or access
  • Have a window or extractor fan available

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Get a fixed quote

Advice

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Check the seal every few months
  • Do not ignore a tray that flexes
  • Use the extractor fan
  • Store bottles off the tray

Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.

Do not keep using a cracked tray. Water may be getting under the tray, where it causes damage you can’t see.

How we price shower tray repair

Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:

  • How easy the damage is to reach
  • The colour and finish to match
  • How much damage there is
  • Whether we combine several jobs

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Send photos for a quote

A couple of clear pictures is all it takes. Try to include:

  • The material, if you know it
  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • One picture of the entire shower tray

For a price in Higher Bal, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

What we are called out for in Higher Bal

Stone resin trays are rigid, so they crack rather than bend if the floor beneath them isn’t flat and fully supported. Timber floors that move can cause it too.

Signs it’s time to call us include:

  • Scratches in the surface
  • A tray that looks tired however much you clean it
  • Snagging damage in a new bathroom
  • A crack across the base

Before you book anyone

  • How your room will be protected
  • What happens if they find more damage
  • Whether the colour is mixed to match
  • If travel is included in the price

How to compare quotes

Repairing versus replacing in Higher Bal

Replacing a tray normally involves taking out the enclosure and tiles, preparing a new base and re-tiling. Repairing or resurfacing the tray leaves all of that alone. Our shower tray repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why choose Surface Doctor in Higher Bal

  • One price list for the entire UK
  • One-year guarantee on every repair
  • Fixed prices from your photos
  • Honest advice, even when it means no job

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.