Nottinghamshire · England

Shower tray repair & resurfacing in Holbeck, Nottinghamshire

Shower tray repair in Holbeck without the cost of replacing. Get a fixed quote from your pictures, then book a visit.

  • Repairs from £95
  • Chips caused during fitting
  • Scuffs and light scratches
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Holbeck?

Your questions about shower tray repair in Holbeck

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Do you reseal the tray as well?

We can. After a repair is a good time to reseal.

What happens next?

You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.

Is there a guarantee?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

Can you resurface a whole tray?

Yes. Resurfacing gives a worn tray an even, clean finish.

Are there extra charges for Holbeck?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Shower tray repair in Holbeck without replacing anything

In most cases, a damaged tray can be repaired where it is, from a chip by the waste to a crack across the base. We match the colour and finish. Typical jobs include chipped corners or rims and staining and dullness across the tray, in ceramic, enamelled steel and cast iron.

Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Area
Holbeck (S80, NG20)
Area hub
Nottinghamshire
Guarantee
12 months on all our work
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What we do, step by step

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, or most of the day to resurface the whole tray. We clean up when we are done and tell you when it’s ready to use.

  1. We ensure the tray does not flex and look for the cause of any crack.
  2. We clean and prepare the damaged area or the entire tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. The repair is colour matched, or the whole tray gets a new finish.
  5. We leave it to cure; the shower is usually usable the following day.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Make sure the room can be ventilated
  • Mention any parking restrictions or tricky access

Getting a price

For a price in Holbeck, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Read more

Why repair rather than replace?

A new tray can be cheap, but fitting it is not: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why book with us

  • Work done at your home or business
  • Same prices wherever you are
  • Most jobs done in one visit
  • Nothing taken out or refitted

See our prices page.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Holbeck and nearby

Holbeck is about 4 miles north of Shirebrook, in Nottinghamshire. Customers in Holbeck get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Holbeck is one of 329 places in Nottinghamshire we cover. We work right across the region, from Holbeck to Leeds (41 miles away).

Jobs in S80 and NG20 work the same way as everywhere else we cover. If you are just outside Holbeck, we cover Holbeck Woodhouse (1 mile east), Cuckney (2 miles south-east), Norton (2 miles east), Hodthorpe (2 miles north) and Church Warsop (3 miles south-east). Larger places within reach include Mansfield (8 miles south), Worksop (5 miles north-east), Sutton in Ashfield (9 miles south), Hucknall (15 miles south), Retford (11 miles north-east) and Mansfield Woodhouse (6 miles south).

What’s near Holbeck

Our customers here include homes close to St Winifred's Church and the streets around them. For rail, the closest station is Creswell station, roughly 1.4 miles north-west. Well-known places in the area include Creswell Crags Museum and Heritage Centre (1.8 miles north) and Norton and Cuckney (1.9 miles south-east). Green spaces nearby include Sandhill Lake.

Map of Holbeck © OpenStreetMap contributors

When to call us in Holbeck

Heavy bottles, shower heads and dropped razors chip trays, generally along the edges or by the waste.

The most common problems we are called about are:

  • Chips on the edges
  • A damaged area around the waste
  • A crack across the base
  • Chips caused during fitting

Questions to ask before you book

  • Aftercare advice
  • Whether the price is fixed and includes VAT
  • Whether they match the colour on site
  • What preparation is included

Our hiring checklist

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • A tray broken in more than one place
  • Plumbing leaks under the tray
  • Damage below the tray that needs a builder

If in doubt, send photos and we’ll say what we think.

What we work on

  • Acrylic
  • Ceramic
  • Cast iron
  • Enamelled steel
  • Stone resin

Materials and what they mean for the repair

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

How to care for the repair

Simple care helps the repair last. We recommend:

  • Store bottles off the tray
  • Use a mild, non-abrasive cleaner
  • Don’t ignore a tray that flexes
  • Use the extractor fan

Keep heavy bottles off the tray floor, to avoid chips.

A small crack lets in a little water every time you shower, and over months that can rot the floor. Getting it repaired quickly is much cheaper than fixing a floor.

For landlords and businesses

If you manage property in Holbeck, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

We regularly work with letting and managing agents. Send the address, pictures and access details.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.