Hampshire · England

Shower tray repair & resurfacing in Hyde, Hampshire

Shower tray repair in Hyde without the cost of replacing. Send us photos for a fixed price, then book a visit.

  • Repairs from £95
  • Scuffs and light scratches
  • Snagging damage in a new bathroom
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Hyde

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

About our shower tray repair in Hyde

We check the tray before repairing it: if it flexes underfoot, the cause needs sorting before any repair, or the crack will come back. We’ll tell you if that’s the case. If you’re dealing with edge chips from dropped bottles and a cracked shower tray, we can help, whatever the material.

Big or small, you get the same one-year guarantee.

Before and after: an old shower tray refinished by Surface Doctor
Area
Hyde (SP6)
Region
Hampshire
Warranty
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • A tray broken in more than one place
  • A tray that flexes because it was never properly supported
  • Leaking waste fittings

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Acrylic
  • Ceramic
  • Stone resin
  • Cast iron
  • Enamelled steel

Landlords, agents and businesses in Hyde

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Keeping it looking good

Nothing complicated is needed:

  • Use a mild, non-abrasive cleaner
  • Avoid strong descalers and bleach
  • Rinse the tray after each shower
  • Reseal when the silicone splits or turns black

Keep scourers and harsh chemicals off the tray. A soft cloth and washing-up liquid do the job.

Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can damage the floor below.

What we’re called out for in Hyde

A tired-looking tray is often the result of years of cleaning: abrasive pads, strong chemicals and limescale wear the finish away.

It’s worth getting a quote if you see:

  • Edge chips from dropped bottles
  • A tray that flexes
  • Staining and dullness across the tray
  • Damage from a refit or building work

Questions to ask before booking

  • What preparation is included
  • How long it needs to cure
  • What the guarantee covers, and for how long
  • How changes to the job are handled

How to compare quotes

Repairs by material

Acrylic

Acrylic-capped trays are lighter, so good support matters. We repair cracks and scratches.

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.

Repair or replace: which is better?

The tray is generally the last thing fitted and the first thing tiled up to, so taking one out disturbs a lot. Repairing it avoids that disruption. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why Hyde clients choose us

  • Technicians who travel to you, UK-wide
  • CHAS and Constructionline accredited
  • Colours mixed by hand to suit your surface
  • Free fixed quotes from pictures

Read our pricing.

Common questions in Hyde

Is a cracked tray repairable?

Typically, as long as it does not flex. We reinforce the crack, fill it and refinish the surface.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can you make an old tray look new?

Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.

What happens if you find more damage?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

What areas do you cover?

All of Hampshire, and the rest of the UK. Travel is included in the price.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Where we work around Hyde

Hyde is about 5 miles north-east of Verwood, in Hampshire. Jobs in Hyde are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover 683 places in Hampshire.

All of SP6 is covered. Streets in the area include Gorley Lynch and Hyde Lane. Close by, we cover Hungerford (1 mile west), Frogham (1 mile north-east), North Gorley (1 mile west), Blissford (1 mile north-east) and Stuckton (1 mile north-west). Within a short drive, we also cover Totton (11 miles east), Lymington (14 miles south-east), Romsey (13 miles north-east), New Milton (12 miles south-east), Ringwood (4 miles south) and Barton on Sea (12 miles south).

Landmarks near Hyde

Locally, our jobs take us to homes close to Hyde Church of England Primary School, Church of the Holy Ascension and The Burgate School and Sixth Form and the streets around them. A little further out are Godshill Castle Hill (2.5 miles north) and Fordingbridge Doll Museum (1.7 miles north-west). Not far away are Blashford Lakes and Linbrook Lake.

Map of Hyde © OpenStreetMap contributors

What we do, step by step

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It typically takes a few hours, or most of the day to resurface the whole tray, and you can get on with other things while we are there.

  1. We protect the floor and the enclosure.
  2. Any sealant in the way is cut out.
  3. We clean and key the tray, then repair the damage.
  4. The surface is refinished to match.
  5. We tidy up and tell you when you can shower.

Getting ready for the visit

  • Have a window or extractor fan available
  • Let us know about parking or access
  • Mention if the room is upstairs or in a flat

Get a quote

Email us photos of the damage and a wider shot of the whole item, with your SP6 postcode, and we will come back with a fixed quote.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.