Staffordshire · England

Shower Tray Repair for Kingsley Holt homes

Fixed-price shower tray repair in Kingsley Holt and the surrounding area, done in a single visit in most cases.

  • Repairs from £95
  • A tray that looks tired however much you clean it
  • Scratches from cleaning or grit
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Kingsley Holt

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Store bottles off the tray
  • Replace failing sealant promptly
  • Ventilate the room after showers
  • Use a mild, non-abrasive cleaner

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

Stop using the shower if the tray is cracked. Water can get through to the floor and walls, and the damage below is not visible.

About our shower tray repair in Kingsley Holt

A worn or stained tray can be resurfaced, for a clean, uniform finish. Typical jobs include chips caused during fitting and a tray that looks tired however much you clean it, on ceramic, stone resin and enamelled steel.

All our work is covered by a one-year guarantee.

Location
Kingsley Holt (ST10)
Area hub
Staffordshire
Guarantee
12 months on all our work
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Our work in Kingsley Holt

Kingsley Holt is about 2 miles north of Cheadle, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 512 towns and villages across Staffordshire, from the larger towns to small villages. Our jobs stretch from Kingsley Holt to Manchester (about 33 miles away).

Postcode districts we cover here: ST10. Local streets include Churnet Valley Road, Sidney Drive and Hillcrest Avenue, all of which we cover. We also travel to Froghall (1 mile north), Kingsley (1 mile west), Hazles Cross (1 mile north-west), Whiston (1 mile east) and Ipstones (2 miles north). Further out, we also cover Newcastle-under-Lyme (11 miles west), Longton (7 miles west), Stone (11 miles south-west), Leek (7 miles north), Biddulph (11 miles north-west) and Alsager (15 miles west).

Around Kingsley Holt

Typical jobs here are in homes near Church of St Werburgh, St Werburgh's CE (A) Primary School and Wolstanton Grammar School, among other places. A little further out are Alton Castle (4.1 miles south-east) and Cheadle Hospital (2.4 miles south). The countryside around Kingsley Holt includes Harston Wood.

Map of Kingsley Holt © OpenStreetMap contributors

Different materials, different repairs

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Common problems we fix in Kingsley Holt

Heavy bottles, shower heads and dropped razors chip trays, typically on the edges or near the plughole.

Send us a photo if you notice any of these:

  • A crack across the base
  • Chipped corners or rims
  • A damaged area around the waste
  • Scratches in the surface

Comparing quotes

  • Whether the price covers travel
  • How long it needs to cure
  • Whether a trained technician does the job
  • How long the guarantee is and what it covers

Choosing a repair company

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What we cannot put right

Some jobs aren’t right for a repair, for example:

  • Leaks from the waste or pipework (a plumber’s job)
  • Multiple cracks across the tray
  • Water damage to the floor beneath the tray

Not sure? Send pictures and we will give you a straight answer before you book.

Surfaces we repair

  • Stone resin
  • Enamelled steel
  • Ceramic
  • Cast iron
  • Acrylic

What happens on the day

Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, or most of a day for a full resurface, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We ensure the tray does not flex and look for the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. The repair is colour matched, or the entire tray gets a new finish.
  5. We leave it to cure; the shower is normally usable the following day.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Let the surface dry out before the visit
  • Let us know about parking or access

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Send photos for a quote

Read more

What affects the price in Kingsley Holt

Repairs from £95. You will not pay by the hour. The price depends on:

  • Whether we combine several jobs
  • The colour and finish to match
  • How many areas need work
  • The type of damage

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.

Quotes from your pictures

A couple of clear pictures is all it takes. Try to include:

  • The postcode, so we can plan the visit
  • A close-up of the damage, in focus
  • The material, if you know it
  • Whether it’s been repaired or coated before

To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Questions from Kingsley Holt

Can you repair several things at once?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.

Is there a guarantee?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

Do you come to Kingsley Holt?

We do. Technicians travel to Kingsley Holt from across the region, and the price is the same as everywhere else.

What happens once I’ve sent photos?

We review the photos and send a fixed quote.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

Can a cracked shower tray be repaired?

Typically, if the tray is firmly supported. We reinforce the crack, fill it and refinish the surface.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.