Staffordshire · England
Bath Re-enamelling in Kingsley Holt
Damaged bath in Kingsley Holt? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Stains that won’t shift
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Bath re-enamelling in Kingsley Holt without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair Victorian roll-tops, pressed steel baths and basins & shower trays, and the jobs we see most are an old resurfacing that’s failing and staining under the taps and around the waste.
Big or small, it’s backed by a one-year guarantee in Kingsley Holt and across Staffordshire.
- Location
- Kingsley Holt (ST10)
- Area hub
- Staffordshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
In fairness, some problems need a different fix:
- A bath that’s rusted through
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Aftercare tips
So the finish stays in good condition for years:
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs immediately
- Use washing-up liquid and a soft cloth
- Have chips seen to early
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
More services for Kingsley Holt
Kingsley Holt: your questions answered
What happens next?
We come back with a fixed quote, generally with dates to choose from. There’s no obligation to book.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Which areas do you work in?
The entire UK, including all of Staffordshire. Just include your postcode and we’ll confirm dates.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Our work in Kingsley Holt
Kingsley Holt is about 2 miles north of Cheadle, in Staffordshire. We visit clients in Kingsley Holt, so nothing has to leave your home. Kingsley Holt is one of 512 places in Staffordshire we cover. Our nearest city page is Manchester, about 33 miles away.
Every address in ST10 is within our area, from the main roads to the quietest streets. You’ll find streets such as Churnet Valley Road, Sidney Drive and Hillcrest Avenue, all of which we cover. Neighbouring places we cover include Froghall (1 mile north), Kingsley (1 mile west), Hazles Cross (1 mile north-west), Whiston (1 mile east) and Ipstones (2 miles north). Further out, we also cover Newcastle-under-Lyme (11 miles west), Longton (7 miles west), Stone (11 miles south-west), Leek (7 miles north), Biddulph (11 miles north-west) and Alsager (15 miles west).
Local landmarks in Kingsley Holt
In Kingsley Holt, that means homes near Church of St Werburgh, St Werburgh's CE (A) Primary School and Wolstanton Grammar School. Nearby you will also find Alton Castle (4.1 miles south-east) and Cheadle Hospital (2.4 miles south). For a walk, there’s Harston Wood.
Repairing versus replacing in Kingsley Holt
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Kingsley Holt customers choose us
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
Read our full price list and guide to resurfacing and replacement costs.
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
Do you need bath re-enamelling in Kingsley Holt?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Send us a picture if you notice any of these:
- An outdated colour you’d like to change
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
Questions to ask before booking
- How to look after the finish
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
- What preparation is included
About our accreditations · Every repair comes with a one-year guarantee.
