Kent · England
Shower tray repair & resurfacing in Labour-in-vain, Kent
Fixed-price shower tray repair in Labour-in-vain and the surrounding area, typically in one visit and guaranteed for a year.
- Repairs from £95
- Damage from a refit or building work
- Chips or cracks by the plughole
What we cannot put right
In fairness, there are a few things a repair won’t fix:
- A tray that flexes because it was never properly supported
- Trays cracked in several places
- Damage below the tray that needs a builder
If in doubt, send photos and we’ll say what we think.
Materials we work on in Labour-in-vain
- Enamelled steel
- Cast iron
- Ceramic
- Stone resin
- Acrylic
How we handle shower tray repair in Labour-in-vain
You don’t always need a new tray. If it’s solid underneath, it can usually be repaired in place, which is far less work than a replacement. We work on acrylic, cast iron and ceramic, and the jobs we see most are a cracked shower tray and scuffs and light scratches.
You get a one-year guarantee, the same in Labour-in-vain as everywhere else we work.
- Location
- Labour-in-vain (TN15)
- Area hub
- Kent
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Questions from Labour-in-vain
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is a cracked shower tray safe to use?
Only if you are sure it is not leaking. Look for damp or stains below.
Do you redo the sealant?
Yes. Add it to your quote and we will do both on one visit.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you quote from pictures?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
Do you cover Labour-in-vain?
Yes, we do. Technicians travel to Labour-in-vain from across the region, and the price is the same as everywhere else.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What your shower tray is made of matters
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and we match repairs to the surface finish.
Where we work around Labour-in-vain
Labour-in-vain is about 6 miles north-east of Sevenoaks, in Kent. Wherever you are in the TN15 postcode area, a technician comes to you. Our repair technicians cover 922 places across Kent, from the larger towns to small villages. You can also see our page for London, about 21 miles away.
Every address in TN15 is within our area. We also cover the places around Labour-in-vain: Wrotham (1 mile south), Fairseat (1 mile north-east), Hodsoll Street (2 miles north-east), Trottiscliffe (2 miles east) and Culverstone Green (3 miles north-east). Further out, we also cover Maidstone (10 miles east), Dartford (9 miles north), Sevenoaks (6 miles south-west), Royal Tunbridge Wells (13 miles south), Gravesend (8 miles north-east) and Tonbridge (8 miles south).
Landmarks near Labour-in-vain
Our clients here include homes close to Trosley Country Park, The George And Dragon Public House and Church of St George and the streets around them. Nearby too are Wrotham School (1.4 miles south) and Wrotham School (1.4 miles south). Labour-in-vain’s nearest station is Borough Green & Wrotham station, about 1.8 miles south. Other landmarks nearby include Beechin Wood Archery Museum (2.7 miles south-east) and Sevenoaks Hospital (5.1 miles south-west).
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Labour-in-vain, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Places near Labour-in-vain
What else we do in Labour-in-vain
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Use a mild, non-abrasive cleaner
- Use the extractor fan
- Do not use strong acids or bleach
- Keep heavy bottles on a shelf
Rinse the tray after use, use mild, non-abrasive cleaners, and keep an eye on the sealant so water can’t get underneath.
Stop using the shower if the tray is cracked. Water can get through to the floor and walls, and the damage below isn’t visible.
How we price shower tray repair
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- Access to the area
- What the surface is made of
- How much damage there is
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- A wider photo showing the entire shower tray
- The postcode, so we can plan the visit
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Should you replace it?
If the tray is solid and the crack hasn’t let water spread, repair is generally best. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Labour-in-vain
- Every repair guaranteed for a year
- Free fixed quotes from pictures
- Same prices wherever you are
- No need to remove anything
Read our full price list.
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, or most of the day to resurface the whole tray, tidy-up included.
- First, we check whether the tray moves.
- We clean the damage and open it up so the repair can bond.
- We reinforce any crack and fill the damage.
- The repair is shaped, colour-matched and finished.
- It’s left to cure, normally until the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Ask for a price
Send us photos of the damage and one of the whole item, with your TN15 postcode, and we’ll reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
