Cambridgeshire · England

Shower tray repair & resurfacing in Lode, Cambridgeshire

Shower tray chip, crack and scratch repairs and resurfacing in Lode, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Staining and dullness across the tray
  • Chips on the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Lode

Shower tray repair at your home in Lode

In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. We match the colour and finish. We are often asked to fix damage around the waste and movement when you stand on it, on cast iron, ceramic and enamelled steel.

Every repair comes with a one-year guarantee, wherever you are in Cambridgeshire.

Stained shower tray resurfaced to clean white, before and after
Location
Lode (CB25)
Area hub
Cambridgeshire
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Lode: your questions answered

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Can you fix a cracked tray?

Typically, as long as it does not flex. The crack is reinforced, filled and refinished.

How much does shower tray repair cost in Lode?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

What happens once I’ve sent photos?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

Can you make an old tray look new?

Yes. A full resurface makes a tired tray look fresh.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Lode and the surrounding area

Lode is about 5 miles north-east of Cambridge, in Cambridgeshire. Across the CB25 area, we come to you. Our technicians cover 371 places in Cambridgeshire. Our jobs stretch from Lode to London (53 miles away).

Postcode districts we cover here: CB25. From High Street, Station Road and Fassage Close or a nearby road, we can come to you. We also travel to Bottisham (1 mile south-east), Swaffham Bulbeck (1 mile east), Commercial End (1 mile east), Stow cum Quy (2 miles south-west) and Frog End (2 miles south). Further out, we also cover Cambridge (5 miles south-west), St Ives (15 miles north-west), Newmarket (7 miles east), Ely (11 miles north), Cambourne (13 miles west) and Littleport (15 miles north).

Near you in Lode

Our clients here include homes close to Church of St James. Lode’s nearest station is Waterbeach station, roughly 2.5 miles north-west. Well-known places in the area include Brookfields Hospital (4.9 miles south-west) and Swaffham Bullbeck (3.9 miles south-east). The countryside around Lode includes Fulbourn Fen.

Map of Lode © OpenStreetMap contributors

What affects the price in Lode

Prices start from £95. You’ll know the full cost before booking. We take into account:

  • Whether old repairs or coatings need taking off
  • Doing more than one item at once
  • How much damage there is
  • The material

Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Quotes from your photos

The better the photos, the more accurate the price. Here’s what we find most useful:

  • Details of any past repairs
  • The material, if you know it
  • One picture of the entire shower tray
  • A coin or ruler next to the damage for scale

Most customers in Lode get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

The process

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take a few hours for a repair, longer for a full resurface.

  1. We ensure the tray doesn’t flex and look for the cause of any crack.
  2. We clean and prepare the damaged area or the entire tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. We match the colour, or refinish the full tray.
  5. The tray is left to cure and can typically be used the next day.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive

Get a quote

For a price in Lode, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed price

Advice

Aftercare tips

It’s all simple stuff:

  • Store bottles off the tray
  • Stick to gentle cleaners
  • Give the tray a quick rinse after use
  • Keep harsh chemicals off the tray

Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep an eye on the sealant so water can’t get underneath.

If the tray creaks or moves, get it checked, before it cracks.

Repairing versus replacing in Lode

Replacing a tray normally involves taking out the enclosure and tiles, preparing a new base and tiling again. A repair or resurface keeps all of that in place. Our shower tray repair starts from £95. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Normally one visit, start to finish
  • A year’s guarantee on all work
  • CHAS, Constructionline and SafeContractor accredited
  • Colour-matched on site

Read our pricing.

When a repair is not the answer

We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • A tray that moves underfoot
  • Trays cracked in several places
  • Water damage to the floor beneath the tray

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Cast iron
  • Stone resin
  • Acrylic
  • Ceramic
  • Enamelled steel

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Materials and what they mean for the repair

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so early repairs help.

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and we match the gloss when we repair them.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.