Highland · Scotland

Shower tray repair & resurfacing in Lonemore, Highland

Shower tray repair across Lonemore and nearby, usually in one visit.

  • Repairs from £95
  • Snagging damage in a new bathroom
  • Chipped corners or rims
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Lonemore

Our work in Lonemore

Lonemore is in Highland. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Lonemore is one of 253 places in Highland where we work.

Here we cover the IV21 postcode area. Close by, we cover Gairloch (1 mile east), Badachro (2 miles south), Poolewe (5 miles north-east), Inverasdale (6 miles north) and Àird (9 miles north-east). Some remote addresses need extra planning, so it’s best to call first.

What’s near Lonemore

We visit homes around Gairloch High School, Gairloch School and Gairloch. Further afield, we also cover the area around Gairloch Museum (1 mile east). Not far away are Linne a' Mhuilinn and Cnoc Dubh.

Map of Lonemore © OpenStreetMap contributors

Shower tray repair in Lonemore without replacing anything

Before repairing a crack, we find out why it happened. A tray that moves needs its support sorting first, so the repair lasts. Common call-outs are for a tray that creaks or moves underfoot and staining and dullness across the tray, across cast iron, enamelled steel and ceramic.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Where
Lonemore (IV21)
Region
Highland
Cover
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

How to care for the repair

To keep it looking its best:

  • Stick to gentle cleaners
  • Do not use strong acids or bleach
  • Give the tray a quick rinse after use
  • Ventilate the room after showers

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

Every shower forces a little water into a crack, which can damage the floor over time. An early repair is far cheaper than floor repairs.

What shower tray repair costs

Prices start from £95. You will know the full cost before you book. We look at:

  • How easy the damage is to reach
  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • What the surface is made of

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • A clear, close picture of the problem area
  • Your postcode, so we can check dates
  • The material, if you know it
  • A wider photo showing the whole shower tray

If you are in Lonemore and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

What your shower tray is made of matters

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.

Honest limits

Before booking, it’s worth knowing the limits:

  • Plumbing leaks under the tray
  • Damage below the tray that needs a builder
  • A tray that flexes because it was never properly supported

Send us pictures and we will tell you honestly before booking.

Materials we repair

  • Acrylic
  • Stone resin
  • Enamelled steel
  • Ceramic
  • Cast iron

FAQs for Lonemore

How long before I can shower?

We will give you the curing time on the day, normally the next day.

Can you quote from photos?

Normally, yes. Clear pictures let us give you a fixed price without visiting.

Is it OK to use a cracked tray?

We would stop using it until it’s repaired, in case water is getting through.

Do you reseal the tray as well?

Yes, if you’d like us to. After a repair is a good time to reseal.

Do the materials smell?

There may be a mild smell during the work that clears as it cures.

Is it OK to have pets in the house?

Just keep them out of the work area. We will tell you when the room can be used again.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Do you cover the entire of Highland?

We cover the entire UK, including Lonemore and the rest of Highland. Just include your postcode and we will offer you dates.

The process

The work is clean and fairly quiet. Protection goes down first, then the work takes a few hours, or most of a day for a full resurface. At the end we talk you through how soon it can be used and how to look after it.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour matched and finished.
  5. It’s left to cure, generally until the next day.

How to prepare

  • Tell us if there are stairs or a lift
  • Let us know if it has been repaired before
  • Keep pets and children out of the room while we work

Get a quote

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Related advice

Landlords, agents and businesses in Lonemore

If you manage property in Lonemore, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.

We’re used to working with agents and managing companies. Send the address, photos and access details.

Common problems we fix in Lonemore

The waste is a common starting point for cracks, because that is where the tray is weakest and the fitting puts pressure on it.

Typical reasons for a call-out include:

  • Chips caused during fitting
  • A tray that creaks or moves underfoot
  • A damaged area around the waste
  • Staining and dullness across the tray

Before booking anyone

  • What preparation is included
  • Whether a trained technician does the job
  • How to care for the finish
  • What the guarantee covers, and for how long

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.