Worcestershire · England
Shower tray repair & resurfacing in Marlbrook, Worcestershire
Shower tray repair in Marlbrook without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Snagging damage in a new bathroom
- Chips on the edges
What we’re called out for in Marlbrook
Rigid trays do not bend, they crack if the floor beneath them isn’t flat and fully supported. Timber floors that move can cause it too.
The things customers generally mention when they call include:
- A damaged area around the waste
- A tray that creaks or moves underfoot
- Scratches from cleaning or grit
- Snagging damage in a new bathroom
What your quote should include
- Is the price fixed, and does it include VAT?
- How your room will be protected
- What prep work is covered
- Who turns up on the day
Shower tray repair at your home in Marlbrook
A cracked or chipped shower tray doesn’t always need replacing. If it’s solid underneath, it can typically be repaired in place, which is far less work than a replacement. We work on ceramic, enamelled steel and acrylic, and common reasons people contact us are snagging damage in a new bathroom and a crack across the base.
Big or small, you get the same one-year guarantee.
- Where
- Marlbrook (B61, B60)
- County
- Worcestershire
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Looking after the surface is easy:
- Check the seal every few months
- Use a mild, non-abrasive cleaner
- Don’t stand heavy bottles on the tray
- Avoid strong descalers and bleach
Keep heavy bottles off the tray floor, so they can’t be knocked over.
A tray that moves underfoot needs looking at, before it cracks or gets worse.
Where we work around Marlbrook
Marlbrook is about 2 miles north of Bromsgrove, in Worcestershire. We visit clients in Marlbrook, so nothing has to leave your home. We work in all 376 towns and villages in Worcestershire, from the larger towns to small villages. We work right across the region, from Marlbrook to Birmingham (10 miles away).
We work across B61 and B60 and the streets around it. From Oak Road, Acorn Road and Braces Lane or a nearby road, we can come to you. Other places close to Marlbrook include Upper Marlbrook (1 mile north-east), Lower Marlbrook (1 mile north), Catshill (1 mile west), Lickey End (1 mile south) and Lydiate Ash (1 mile north). Within a short drive, we also cover Worcester (14 miles south-west), Redditch (6 miles south-east), Kidderminster (9 miles west), Droitwich Spa (9 miles south-west), Stourport-on-Severn (10 miles west) and Bewdley (12 miles west).
Local landmarks in Marlbrook
Locally, our jobs take us to homes close to Catshill First School, Lickey Hills Country Park and North Bromsgrove High School and the streets around them. You’ll also find Miller & Carter pub (under half a mile north-west) and St Luke (less than half a mile north-west). The closest station to Marlbrook is Barnt Green station, roughly 2 miles east of the centre. Other landmarks nearby include Castlebourne folly (2.6 miles north-west) and Norton Collection Museum (1.8 miles south). Open spaces near Marlbrook include Chaddesley Woods National Nature Reserve and Bilberry Hill.
What shower tray repair costs
Prices start from £95. We do not charge extra for travel to Marlbrook. The price comes down to:
- Previous DIY repairs that have to come out
- The material and finish
- How easy the damage is to reach
- Unusual colours or finishes
A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Any details about the material
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Places near Marlbrook
Other services in Marlbrook
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Damage below the tray that needs a builder
- Leaks from the waste or pipework (a plumber’s job)
- Movement caused by a poor base, until the support is fixed
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Acrylic
- Enamelled steel
- Stone resin
- Ceramic
- Cast iron
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Worcestershire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Common questions in Marlbrook
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What does shower tray repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Is a cracked shower tray safe to use?
Only if you’re sure it isn’t leaking. Look for damp or stains below.
Are there extra charges for Marlbrook?
Travel is included in the price, and we charge the same wherever you are.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
When can I use the shower again?
Typically the next day. We will tell you the exact time when we finish.
Is a cracked tray repairable?
Often. A tray that moves needs its support sorting before the repair.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Different materials, different repairs
Stone resin
Stone resin trays are heavy and rigid with a gel-coat finish. Poor support underneath leads to cracks, and chips can be filled and matched.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours for a repair, longer for a full resurface, including clearing up.
- We check the tray is firmly supported and find the cause of any crack.
- The damaged area, or the entire tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- We colour-match the repair, or spray a new finish across the whole tray.
- The tray is left to cure and can generally be used the following day.
How to prepare
- Make sure the room can be ventilated
- Let us know about parking or access
- Let the surface dry out before the visit
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
