Aberdeenshire · Scotland

Shower Tray Repair in Midmar

We travel to Midmar for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Chips on the edges
  • Chips caused during fitting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Midmar

About our shower tray repair in Midmar

A worn or stained tray can be resurfaced, for a clean, uniform finish without removing the screen or tiles. Our technicians work on stone resin, enamelled steel and ceramic, and the jobs we see most are scratches in the surface and a tray that flexes.

Big or small, it’s backed by a one-year guarantee.

Discoloured square shower tray restored with a new white finish
Where
Midmar (AB51)
Region
Aberdeenshire
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Don’t ignore a tray that flexes
  • Clean with washing-up liquid and a soft cloth
  • Check the seal every few months
  • Rinse away soap after showering

Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.

Act on split sealant early. It lets water behind the tray and can cause damage underneath.

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

Midmar and nearby

Midmar is about 10 miles south-west of Inverurie, in Aberdeenshire. From the centre of Midmar to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Midmar is one of 161 places in Aberdeenshire where we work.

Our visits in AB51 work the same way as everywhere else we cover. Other places close to Midmar include Sauchen (2 miles north-east), Echt (4 miles east), Dunecht (4 miles east), Monymusk (5 miles north) and Kirkton of Tough (5 miles north-west). Within a short drive, we also cover Inverurie (10 miles north-east), Westhill (9 miles east), Banchory (7 miles south), Garioch (10 miles north-east), Kemnay (6 miles north-east) and Kintore (8 miles north-east). If you’re somewhere remote, call first so we can plan the visit.

What’s near Midmar

Further afield, we also cover the area around Midmar Castle (2.1 miles south-east). The countryside around Midmar includes Hill of Fare.

Map of Midmar © OpenStreetMap contributors

What your shower tray is made of matters

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and we match repairs to the surface finish.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Common questions in Midmar

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

What if the damage is worse than the pictures show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Is a cracked tray repairable?

Often. A tray that moves needs its support sorting before the repair.

What areas do you cover?

We work UK-wide, and that includes Midmar. Our prices are the same everywhere.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Is a cracked shower tray safe to use?

Not until you know the crack is not letting water through. Look for damp or stains below.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What happens next?

We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.

Repair or replace in Midmar?

Replacing a tray normally involves taking out the enclosure and tiles, relaying the base and tiling again. Repairing or resurfacing the tray keeps all of that in place. Prices start from £95. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why book with us

  • Same prices wherever you are
  • We come to you, anywhere in the UK
  • A year’s guarantee on all work
  • CHAS and Constructionline accredited

Take a look at our prices page.

What affects the price in Midmar

Prices start from £95. A fixed quote means you know the cost before you book. We look at:

  • Previous DIY repairs that have to come out
  • The colour and finish to match
  • What the surface is made of
  • How many items we do on one visit

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send pictures for a quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • The postcode, so we can plan the visit
  • Any details about the material

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole shower tray, we can price the job the same day in most cases.

What we’re called out for in Midmar

Cracks frequently start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.

The things clients usually mention when they call are:

  • Chipped corners or rims
  • Snagging damage in a new bathroom
  • A damaged area around the waste
  • Scratches from cleaning or grit

What to look for in a quote

  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price
  • What happens if the damage is worse than the photos show
  • Who turns up on the day

10 questions to ask before you book

How it works

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a few hours, or most of the day to resurface the whole tray. At the end we talk you through the curing time and the aftercare.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. The tray is cleaned, keyed and repaired.
  4. We refinish the surface to match the tray.
  5. We clean up and give you the curing time.

How to prepare

  • Keep children and pets away from the room on the day
  • Tell us if there are stairs or a lift
  • Clear the area around the damage

Ask for a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.