Flintshire · England
Shower tray repair & resurfacing in Milwr, Flintshire
Damaged shower tray in Milwr? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A cracked shower tray
- Edge chips from dropped bottles
Shower tray repair in Milwr, done in place
You do not always need a new tray. If it’s firmly supported, we can repair it where it is, saving you the cost and mess of a new one. We work on enamelled steel, cast iron and stone resin, and the jobs we see most are a crack across the base and staining and dullness across the tray.
Big or small, it’s backed by a one-year guarantee.
- Where
- Milwr (CH8, CH6)
- Region
- Flintshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Milwr
Rigid trays do not bend, they crack when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.
Send us a picture if you notice any of these:
- Damage from a refit or building work
- Scratches in the surface
- A tray that looks tired however much you clean it
- Chipped corners or rims
Before booking anyone
- How to care for the finish
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the photos show
Repairing versus replacing in Milwr
The tray itself may not cost much, but the work around it does: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Our shower tray repair starts from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- Generally one visit, start to finish
- Free fixed quotes from pictures
- Colour mixed on the day to match
- Nothing taken out or refitted
Take a look at our prices page.
What shower tray repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- The material and finish
- Any earlier repairs that need removing first
- The colour and finish to match
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A wider photo showing the entire shower tray
- Any details about the material
Send us a photo of the damage and a wider shot of the entire item, with your CH8 postcode, and we’ll come back with a fixed quote.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What we cannot put right
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- Leaking waste fittings
- Trays cracked in several places
- A tray that flexes because it was never properly supported
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Ceramic
- Stone resin
- Acrylic
- Cast iron
- Enamelled steel
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Questions from Milwr
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
What areas do you cover?
We cover the entire UK, including Milwr and the rest of Flintshire. Just include your postcode and we’ll offer you dates.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you cover Milwr?
We do. Technicians travel to Milwr from across the region, and the price is the same as everywhere else.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Where we work around Milwr
Milwr is about 1 mile south of Holywell, in Flintshire. Whether you’re in the middle of Milwr or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Milwr is one of 139 places in Flintshire where we work. You can also see our page for Liverpool, about 15 miles away.
Postcode districts we cover here: CH8 and CH6. Local streets include Halkyn Road, Brynford Road and Old Chester Road. Other places close to Milwr include Pen-y-maes (1 mile north), Brynffordd (1 mile west), Holywell (1 mile north), Bryncelyn (1 mile north) and Calcoed (1 mile west). We also work in nearby towns such as Connah's Quay (7 miles south-east), Buckley (8 miles south-east), Bwcle (9 miles south-east), Flint (4 miles south-east), Saltney (13 miles south-east) and Mold (7 miles south-east).
Landmarks near Milwr
We visit homes around Calcot Arms, Ysgol Treffynnon and Parish Church of St James and the streets around them. Other local landmarks include Ysgol Maes-Y-Felin (0.9 miles north) and Tabernacle English Congregational Church (0.7 miles north). The closest station to Milwr is Flint station, roughly 3.5 miles east of the centre. Other landmarks nearby include St Winefride's Well Museum (1.1 miles north) and Holywell Castle Mound (1.1 miles north). The countryside around Milwr includes Cefn.
Also near Milwr
What else we do in Milwr
How it works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a few hours for a repair, longer for a full resurface. We clean up when we’re done and let you know when you can use it again.
- The surrounding area is sheeted and masked.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- We refinish the surface to match the tray.
- We tidy up and tell you when you can shower.
How to prepare
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Get a quote
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Read more
Keeping it looking good
After the repair has cured, a few habits help it last:
- Keep harsh chemicals off the tray
- Clean with washing-up liquid and a soft cloth
- Reseal when the silicone splits or turns black
- Report any creaking or movement early
Keep heavy bottles off the tray floor, to avoid chips.
A tray that moves underfoot needs looking at, before it cracks or gets worse.
About our accreditations · Every repair comes with a one-year guarantee.
