Herefordshire · England
Shower Tray Repair for Moorcot homes
Local shower tray repair for Moorcot: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A dull, stained or worn surface
- Damage around the waste
Shower tray repair in Moorcot, done in place
Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. The colour and finish are matched so the repair blends in. If you are dealing with chips or cracks by the plughole and a crack across the base, we can help, on stone resin, acrylic and enamelled steel alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Moorcot (HR5)
- Region
- Herefordshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Keep heavy bottles on a shelf
- Keep harsh chemicals off the tray
- Ventilate the room after showers
- Rinse away soap after showering
Store heavy bottles on a shelf, not on the tray, so they cannot be knocked over.
Every shower forces a little water into a crack, which can damage the floor over time. An early repair is far cheaper than floor repairs.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Herefordshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Our work in Moorcot
Moorcot is about 14 miles north-west of Hereford, in Herefordshire. Across the HR5 area, we carry out the work at your property. Moorcot is one of 255 towns and villages in Herefordshire we cover. Our nearest city page is Birmingham, about 48 miles away.
All of HR5 is covered. Nearby, we also work in Woonton Ash (1 mile south-west), Lower Broxwood (1 mile south), Holme Marsh (1 mile south-west), Lyonshall (1 mile west) and Woonton (2 miles south). Larger places within reach include Hereford (14 miles south-east), Leominster (9 miles east), Redhill (14 miles south-east), Newton Farm (14 miles south-east), Whitecross (13 miles south-east) and Eign Hill (14 miles south-east).
Around Moorcot
We visit homes around St Mary's Church. A little further out are Lyonshall Castle (1.6 miles west) and Kington Museum and History Centre (3.8 miles west). For a walk, there is Rushock Hill and Titley Pool.
Repair or replace in Moorcot?
Replacing a tray normally involves taking out the enclosure and tiles, preparing a new base and tiling again. Repairing or resurfacing the tray leaves all of that alone. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Moorcot clients choose us
- Fixed prices from your photos
- We leave the room as we found it
- One-year guarantee on every repair
- We will tell you if it’s not worth repairing
Take a look at our full price list.
Common questions in Moorcot
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Are there extra charges for Moorcot?
We don’t add a call-out fee. Your fixed price includes everything.
How long does it take to cure?
You will get the exact time when we finish.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you quote from pictures?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Can you resurface a whole tray?
Yes. We can resurface the whole tray for a fresh finish without removing it.
What affects the price in Moorcot
Repairs from £95. Prices are worked out job by job. What matters most is:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- Access to the area
- The material and finish
The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Natural light rather than flash
- One picture of the entire shower tray
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
What we do, step by step
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a few hours, or most of a day for a full resurface from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We check the tray for movement first.
- The damaged area is cleaned and opened up.
- Cracks are reinforced and the damage filled.
- We shape the repair, match the colour and finish it.
- It’s left to cure, normally until the next day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
What else we do in Moorcot
When a repair isn’t the answer
It helps to know what we can’t do too:
- Leaking waste fittings
- Multiple cracks across the tray
- A tray that flexes because it was never properly supported
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron
- Ceramic
- Acrylic
- Enamelled steel
- Stone resin
Different materials, different repairs
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so early repairs help.
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. They crack if the base isn’t fully supported, and chips can be filled and matched.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
