Warrington · England
Shower tray repair & resurfacing in Moore, Warrington
Shower tray chip, crack and scratch repairs and resurfacing for householders, landlords and businesses in Moore. Send photos for a free, fixed quote.
- Repairs from £95
- Edge chips from dropped bottles
- A crack across the base
About Moore
Moore is about 3 miles north-east of Runcorn, in Warrington. From the centre of Moore to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 72 places in Warrington, from the larger towns to small villages. Our jobs stretch from Moore to Liverpool (about 12 miles away).
We cover every part of the WA4 postcode area. We regularly work on streets such as Lindfield Close, Runcorn Road and Beechmoore and the roads around them. Other places close to Moore include Keckwick (1 mile south-west), Moss Side (1 mile north-west), Higher Walton (1 mile east), Daresbury (1 mile south) and Sandymoor (1 mile south-west). Within a short drive, we also cover Warrington (4 miles north-east), Golborne (9 miles north), Lymm (7 miles east), Fearnhead (5 miles north-east), Wilderspool (3 miles north-east) and Lowton (9 miles north).
What’s near Moore
In Moore, that means homes near Sandymoor School, Morley Common and All Saints' Church. You will also find Moore Primary School (under half a mile west) and The Red Lion Public House (within half a mile south-east). For rail, the closest station is Runcorn East station, about 2.1 miles south-west. Other landmarks nearby include Halton Castle (2.8 miles south-west) and Museum of Policing in Cheshire (2.7 miles north-east). Not far away are Paddington Meadows.
About our shower tray repair in Moore
You don’t always need a new tray. If it’s firmly supported, we can repair it where it is, saving you the cost and mess of a new one. Whether it’s chips or cracks by the plughole and chips on the edges, we can help, on cast iron, enamelled steel and acrylic alike.
Every job is backed for twelve months in Moore and everywhere else. If something goes wrong with the work, we come back.
- Location
- Moore (WA4)
- Region
- Warrington
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a few hours, or most of a day for a full resurface. Before we leave, we explain the curing time and the aftercare.
- We protect the floor and the enclosure.
- Any sealant in the way is cut out.
- The tray is cleaned, keyed and repaired.
- We refinish the surface to match the tray.
- We clean up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Ask for a price
Most customers in Moore get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Moore as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Moore questions
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How much does shower tray repair cost in Moore?
Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item with your WA4 postcode.
Can a stained tray be refinished?
Yes. Resurfacing gives a worn tray an even, clean finish.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you redo the sealant?
Yes. We can repair and reseal on the same visit.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Repairs by material
Acrylic
Acrylic-capped trays are lighter, so a firm base is essential. Cracks and scratches can be repaired.
Enamelled steel
Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- What the surface is made of
- What kind of damage it is
- The colour and finish to match
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- A photo taken from further back
- Any earlier repairs or coatings
- A close-up of the damage, in focus
Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Moore, and we will reply with a fixed quote.
What we cannot put right
To be straight with you, there are a few things a repair will not fix:
- Plumbing leaks under the tray
- Damage below the tray that needs a builder
- Trays cracked in several places
Send us pictures and we will tell you honestly.
Materials we work on in Moore
- Acrylic
- Ceramic
- Cast iron
- Stone resin
- Enamelled steel
When to call us in Moore
Stone resin trays are rigid, so they crack rather than bend if the floor beneath them is not flat and fully supported. Movement in a timber floor has the same effect.
Common reasons people in Moore contact us include:
- Movement when you stand on it
- Damage from a refit or building work
- A crack across the base
- Scratches from cleaning or grit
What your quote should include
- Whether they match the colour on site
- How changes to the job are handled
- How soon you can use it again
- Whether the price is fixed and includes VAT
Places near Moore
What else we do in Moore
Repairing versus replacing in Moore
The tray itself may not cost much, but the work around it does: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Prices start from £95. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
What you get with us
- Colour-matched on site
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
Take a look at our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
