Lancashire · England

Shower tray repair & resurfacing in Newby, Lancashire

Local shower tray repair for Newby: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips on the edges
  • Staining and dullness across the tray
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Newby homes

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes a few hours for a repair, longer for a full resurface. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. The damaged area, or the whole tray, is cleaned and prepared.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. The repair is colour matched, or the whole tray gets a new finish.
  5. We leave it to cure; the shower is generally usable the following day.

Before we arrive

  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire shower tray, we can price the job the same day in most cases.

Get a free quote

Advice

About our shower tray repair in Newby

We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, or resurface the whole tray if it’s worn. The tray stays in place, so the enclosure and tiles aren’t disturbed. Typical jobs include chipped corners or rims and snagging damage in a new bathroom, in acrylic, ceramic and cast iron.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Discoloured square shower tray restored with a new white finish
Location
Newby (BB7)
County
Lancashire
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

When a repair is not the answer

We would rather lose a job than do one that won’t last, so these are the limits:

  • Trays cracked in several places
  • Rotten or damaged flooring underneath
  • Leaks from the waste or pipework (a plumber’s job)

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Acrylic
  • Enamelled steel
  • Cast iron
  • Ceramic
  • Stone resin

Why repair rather than replace?

The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. Repairing it takes one visit. Our shower tray repair starts from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before booking.

What you get with us

  • Colour-matched on site
  • Nothing taken out or refitted
  • Fixed prices from your pictures
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our prices page.

FAQs for Newby

What happens next?

We review the pictures and send a fixed quote.

Can I add another job to the visit?

Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.

When can I use the shower again?

Normally by the following day. We’ll confirm before we leave.

Do you redo the sealant?

Yes. Add it to your quote and we will do both on one visit.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will take it from there.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Aftercare tips

Once the work has cured, treat it gently:

  • Use a mild, non-abrasive cleaner
  • Do not use strong acids or bleach
  • Do not ignore a tray that flexes
  • Use the extractor fan

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

Failed sealant around a tray should be replaced quickly. It lets water behind the tray and can cause damage underneath.

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Where we work around Newby

Newby is about 4 miles west of Barnoldswick, in Lancashire. We travel to homes and businesses in Newby and the surrounding area, so you don’t need to take anything anywhere. Newby is one of 482 towns and villages in Lancashire we cover. You can also see our page for Manchester, about 30 miles away.

Jobs in BB7 are booked in the same way as anywhere else. That includes homes on Newby Back Lane and Newby Lane. Neighbouring places we cover include Rimington (1 mile west), Howgill (1 mile east), Gisburn (2 miles north-east), Horton (4 miles north-east) and Halton West (5 miles north). Within a short drive, we also cover Burnley (8 miles south), Accrington (11 miles south), Nelson (6 miles south-east), Rawtenstall (14 miles south), Colne (6 miles south-east) and Clitheroe (5 miles south-west).

Landmarks near Newby

Further afield, we also cover the area around Tom Varley Museum of Steam (1 mile east) and Clitheroe Community Hospital (3.9 miles south-west). The countryside around Newby includes Weets Hill and Salthill Quarry.

Map of Newby © OpenStreetMap contributors

Repairs by material

Stone resin

Stone resin trays are rigid and slim. They need a flat, solid base, and repairs are matched to the gel coat.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

Common problems we fix in Newby

On timber floors, movement can crack a tray, especially if the tray wasn’t bedded properly. On solid floors, cracks typically point to an uneven base.

Clients usually contact us about:

  • A crack across the base
  • Scuffs and light scratches
  • Chipped corners or rims
  • Chips or cracks by the plughole

Before you book anyone

  • What prep work is covered
  • Who turns up on the day
  • The length of the guarantee and what it covers
  • Whether the price is fixed and includes VAT

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.