Norfolk · England

Shower tray repair & resurfacing in Old Brigg, Norfolk

Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Old Brigg and across Norfolk. Send photos for a free, fixed quote.

  • Repairs from £95
  • Snagging damage in a new bathroom
  • Scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Old Brigg?

About our shower tray repair in Old Brigg

A worn or stained tray can be resurfaced, for a clean, uniform finish without removing the screen or tiles. Our repair technicians work on stone resin, cast iron and acrylic, and common reasons people contact us are a tray that creaks or moves underfoot and cracks running from the waste.

Every repair comes with a one-year guarantee, wherever you are in Norfolk.

Where
Old Brigg (NR19)
Region
Norfolk
Guarantee
A year, on every repair
Price
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Old Brigg and nearby

Old Brigg is about 2 miles north-west of Dereham, in Norfolk. We travel to customers in Old Brigg and the surrounding area, so nothing has to leave your home. We cover all 797 towns and villages in Norfolk.

Every address in NR19 is covered, from the main roads to the quietest streets. Streets in the area include Old Bridge and Church Lane, all of which we cover. We also cover the places around Old Brigg: Gressenhall (1 mile north), Beetley (1 mile north-east), Old Beetley (2 miles north), Hoe (2 miles east) and Swanton Morley (3 miles east). We also work in nearby towns such as Wymondham (13 miles south-east), Attleborough (14 miles south), Watton (10 miles south), Hethersett (13 miles south-east), Swaffham (10 miles south-west) and Cringleford (15 miles south-east).

Local landmarks in Old Brigg

In Old Brigg, that means homes near Northgate High School and Church of St Mary. Well-known places in the area include Gressenhall Farm and Workhouse (1 mile north-east) and Mileham Castle (3.9 miles north-west). Not far away are Hoe Rough.

Map of Old Brigg © OpenStreetMap contributors

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

FAQs for Old Brigg

Do the materials smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

What information do you need?

Some photos, your postcode and how to reach you. On the day, access to the room.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so mention it when you send photos.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you come to Old Brigg?

Yes, we do. We send a technician to Old Brigg for every job, with no extra charge for travel.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

How long before I can shower?

You’ll get the exact time when we finish.

Aftercare tips

Simple care helps the repair last. We recommend:

  • Rinse the tray after each shower
  • Stick to gentle cleaners
  • Reseal when the silicone splits or turns black
  • Get a moving tray checked

Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.

Every shower forces a little water into a crack, and over months that can rot the floor. An early repair is far cheaper than floor repairs.

When we’d advise against a repair

Some jobs are not right for a repair, including:

  • Trays cracked in several places
  • Leaking waste fittings
  • Damage below the tray that needs a builder

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Ceramic
  • Enamelled steel
  • Stone resin
  • Acrylic
  • Cast iron

Common problems we fix in Old Brigg

Dull and stained trays are typically down to cleaning: abrasive pads, strong chemicals and limescale strip the surface finish.

Keep an eye out for any of the following:

  • A tray that flexes
  • Edge chips from dropped bottles
  • Damage from a refit or building work
  • A dull, stained or worn surface

Comparing quotes

  • What aftercare is recommended
  • Whether a trained technician does the job
  • What happens if they find more damage
  • How soon you can use it again

Our hiring checklist

Repairs by material

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so it’s worth repairing early.

What happens on the day

We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours for a repair, longer for a full resurface. The room is left tidy and you will know when it can be used.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Clear the area around the damage
  • Open a window if you can

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

Send pictures for a quote

Read more

Should you replace it?

When the tray is firm and dry underneath, repair is the obvious choice. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Our shower tray repair starts from £95. Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

What you get with us

  • Work done at your home or business
  • Colours mixed by hand to suit your surface
  • Normally one visit, start to finish
  • Every repair guaranteed for a year

Take a look at our pricing.

Work for landlords and builders

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.