Surrey · England

Shower Tray Repair for Pyle Hill homes

Fixed-price shower tray repair in Pyle Hill and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • A crack across the base
  • Chipped corners or rims
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Pyle Hill

Shower tray repair at your home in Pyle Hill

You don’t always need a new tray. If it’s solid underneath, it can generally be repaired in place, which is far less work than a replacement. We regularly repair acrylic, ceramic and cast iron, and common reasons people get in touch are a crack across the base and edge chips from dropped bottles.

Whatever the size of the job, you get the same one-year guarantee.

Where
Pyle Hill (GU22)
Region
Surrey
Guarantee
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • Leaks from the waste or pipework (a plumber’s job)
  • Water damage to the floor beneath the tray
  • A tray that moves underfoot

Send us pictures and we’ll tell you honestly.

Materials we work on in Pyle Hill

  • Ceramic
  • Stone resin
  • Enamelled steel
  • Acrylic
  • Cast iron

Repairing versus replacing in Pyle Hill

A new tray can be cheap, but fitting it isn’t: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Repairs from £95, with every job priced individually. Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

What you get with us

  • One price list for the whole UK
  • Accredited with CHAS, Constructionline and SafeContractor
  • Rooms protected and left tidy
  • Straight answers about what a repair can do

Read our full price list.

Repairs by material

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so early repairs help.

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

When to call us in Pyle Hill

Rigid trays do not bend, they crack if the floor beneath them isn’t flat and fully supported. Movement in a timber floor has the same effect.

Common reasons people in Pyle Hill contact us are:

  • Chips caused during fitting
  • Scratches in the surface
  • Chips or cracks by the plughole
  • A cracked shower tray

Comparing quotes

  • Whether cleaning and preparation are in the price
  • How changes to the job are handled
  • How long the guarantee is and what it covers
  • What protection goes down before work starts

Our hiring checklist

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Replace failing sealant promptly
  • Rinse away soap after showering
  • Report any creaking or movement early
  • Clean with washing-up liquid and a soft cloth

Store heavy bottles on a shelf, not on the tray, so they cannot be knocked over.

Do not keep using a cracked tray. Water can get through to the floor and walls, where it causes damage you cannot see.

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

FAQs for Pyle Hill

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before.

Do you reseal the tray as well?

Yes, if you’d like us to. It’s a good time to replace old sealant.

Will there be a smell?

There can be some smell while we work. It clears as the materials cure.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Pyle Hill and the surrounding area

Pyle Hill is about 2 miles south of Woking, in Surrey. From the centre of Pyle Hill to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Pyle Hill is one of 395 places in Surrey we cover. You can also see our page for London, about 25 miles away.

Our visits in GU22 are booked in the same way as anywhere else. Local streets include Maybourne Rise, Guildford Road and Pyle Hill. We also cover the places around Pyle Hill: Mayford (1 mile north-east), Sutton Green (1 mile south-east), Jacobs Well (1 mile south), Send (2 miles east) and Bellfields (2 miles south). Within a short drive, we also cover Guildford (3 miles south), Camberley (7 miles north-west), Epsom (14 miles east), Farnham (11 miles south-west), Ewell (14 miles east) and Egham (10 miles north).

Near you in Pyle Hill

We visit homes around All Souls' Church, Hoe Valley School and Westfield Primary School and the streets around them. Nearby too are Hoe Valley School (0.8 miles north), Drumming Snipe pub (0.5 miles north) and Mayford Meadows (0.6 miles north). Pyle Hill has its own railway station: Worplesdon station. Other landmarks nearby include The Hockey Museum (2.2 miles north) and Woking Community Hospital (2 miles north). Not far away are Pewley Hill and Brookwood Lye.

Map of Pyle Hill © OpenStreetMap contributors

How it works

Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a few hours for a repair, longer for a full resurface from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Getting ready for the visit

  • Point us to the nearest place to park
  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive

Getting a price

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Get a fixed quote

Related advice

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.